IBV LED Catalogue

870-INSPIRE PC High-end dust and waterproof luminaires with LED modules. Synergy of art and technology Inspiring design in professional quality. YOUR MAIN BENEFITS: Gear tray integrated into the diffuser Cost-efficient and user-friendly installation even without disassembling the luminaire

11

NO LIMITS

PC PC

PC PMMA

FIELD OF APPLICATION: Thanks to the construction principles of the gasket, the closing system and the diffuser our LED fixtures ensure a high grade of protection (IP66) against dust, contamination and water permeation (Optionally available in IP67). In accordance with their IP rating they can be widely used to illuminate spaces with dusty and humid environments Thanks to its enhanced impact resistance , 870-Inspire PC is especially suitable for applications, where a high IK impact rating is required. When using outdoors, the fittings should be protected against direct sunlight and adverse weather conditions. Under 0°C the application of a venting plug or a venting cable gland is necessary, as well as the silicone gasket is recommended. TECHNICAL DESCRIPTION AND BENEFITS: n Housing: It is made of flame retardant injection moulded Polycarbonate (PC) in light grey (RAL7035) colour (suitable for 850°C glow wire test too). Polycarbonate has very high mechanical strength and allows us to reach an excellent shock resistance. n Diffuser: Available in PC – injection moulded opalised Polycarbonate (high mechanical strength and high heat and shock resistance – up to IK10). As an option, injection moulded acrylic (PMMA) diffuser in opal version is available. Further benefits: - Extremely high light transmissivity (up to 90%) - Homogenous, well-balanced light dispersing (no shadows) - Keeping the usual, well known features of the diffuser such as chemical and heat resistance, mechanical features, UV stabilization etc. - Universal width (no single and twin) simplifies the light calculation. n The gasket between the diffuser and the housing is available in two versions: - Injected endless silicone foam - Non-aging PU (polyurethane) endless foam n Fixing the diffuser to the body: With stainless steel clips. n Gear tray (reflector): The gear tray is integrated into the diffuser thus enabling a cost-efficient and user- friendly installation even without disassembling the luminaire. White powder coated steel sheet, the LED modul mounting positions according to Zhaga standards or customized. n Electrical components: The adequate power supply is ensured through electronic driver.

D

IK 08

Option:

16

Made with FlippingBook - Share PDF online