IBV LED Catalogue

872-ENTRY PC Industrial dust and waterproof luminaires with LED modules Trend-setting lighting in IP66 (option in IP67), quick installation. Specially developed for LED applications. YOUR MAIN BENEFITS: Size perfectly adapted to LED , easy to install, slim design


Mounting Instruction Video



FIELD OF APPLICATION: Thanks to the construction principles of gasket, closing system and diffuser our LED fixtures ensure a high grade of protection (IP66) against dust, contamination and water permeation. (Optionally available in IP67). In accordance with their IP rating they can be widely used to illuminate spaces with dusty and humid environment. Thanks to its enhanced impact resistance , 872-Entry PC is espesially suitable for applications, where a high IK impact rating is required. When using outdoors, the fittings should be protected against direct sunlight and adverse weather conditions. Under 0°C the application of venting cable gland is necessary, as well as the silicone gasket is recommended. TECHNICAL DESCRIPTION AND BENEFITS: n Housing: It is made of flame retardant injection moulded Polycarbonate (PC) in light grey (RAL7035) colour (suitable for 850°C glow wire test too). Polycarbonate has very high mechanical strength and allows us to reach an excellent shock resistance. n Diffuser: Available in PC - injection moulded opalised Polycarbonate (high mechanical strength and high heat and shock resistance – IK08). As option, injection moulded acrylic (PMMA) diffuser in opal version is available. Further benefits: - Extremely high lighting efficiency through high light permeability, unique on the market , up to 90% - An excellent light uniformity through well-balanced light dispersing (no shadows) - Elimination of the dazzling effect (no glare) - Keeping the usual, well known features of the diffuser such as chemical and heat resistance, mechanical features, UV stabilization etc. - Universal width (no single and twin) and slim shape simplifies the light calculation . n The gasket between the diffuser and housing is available in two versions: - Injected endless silicone foam - Non-aging PU (polyurethane) endless foam n Fixing the diffuser to the body: With tamper-proof (vandal-proof) stainless steel clips. n Gear tray (reflector): White powder coated steel sheet according to Zhaga standards or customised. n Electrical components: The adequate power supply is ensured with the electronic driver, that is built into the luminaire.





Made with FlippingBook - Share PDF online