IBV LED Catalogue

RETROFIT LED 775-PRO LT Industrial dust and waterproof luminaires With 1 and 2 LED tubes.

YOUR MAIN BENEFITS: This product family has been designed for energy efficient LED tubes . Full range available in IP65 and IP66.



FIELD OF APPLICATION: Thanks to the construction principals of gasket, closing system and diffuser our fixtures ensure a high grade of protection (IP65, IP66) against dust, contamination and water permeation. In accordance with their IP grade they can be widely used to illuminate spaces with dusty and humid environment. When using outdoors, the fittings should be protected against direct sunlight and adverse weather conditions. Under 0°C the application of venting cable gland is necessary, as well as silicone gasket is strongly recommended. TECHNICAL DESCRIPTION AND BENEFITS: n Housing: It is made of flame retardant injection moulded polycarbonate (PC) – suitable for 850°C glow wire test too –, in light grey (RAL7035) colour. This material has very high mechanical strength and allows us to reach an excellent shock resistance. n The diffuser is available in the following versions: Injection moulded acrylic (PMMA): transparent, with longitudinal prisms, designed with respect to their optical characteristics. Main advantages of PMMA: very good transparency (better than the transparency of glass), unique nonaging properties, high chemical and UV-resistance . Injection moulded polycarbonate (PC): transparent, with longitudinal internal prisms, designed with respect to their optical characteristics. Main advantages of PC: high mechanical strength and high heat and shock resistance – up to IK10. n The gasket between the diffuser and housing is made of non-aging PU (polyurethane) foam. Silicone- based foam with enhanced resistance is optionally available. n Fixing the diffuser to the body: with stainless steel clips. n Gear tray (reflector): white powder coated steel sheet. n Way of installing: with stainless steel mounting brackets (easy-to-install) onto the wall or ceiling or suspended. n Electrical components: The adequate power supply is ensured through electronic driver, that is built in into the LED tube.







Made with FlippingBook - Share PDF online