WELDED CYLINDERS - BUSHING & CLEVIS TYPE
Automated welding of ports provides higher quality, strength and appearance
Special snap-in type wiper seals, specially designed to prevent exterior contamination and moisture ingress. Molded ribs provide extra stability to the seal and help prevent pressure trapping
Heavy duty Grade 8 (100,000 psi. Yield) piston nuts, torqued to specifications and held with thread/locker sealant or lock nut Heavy duty Ports (Thicker walls)
Lockable gland design
Double lip U-cup seal single acting on rod
Assymetric U-cup piston seal
Cross tube and welded with a positioner
Ductile iron
End cap welded with a positioner
Chrome plated rods. 90 hrs minimum on ASTM B117-02 procedure salt spray tests.
Gloss black paint over primer
Dual seal replacing back up and O-Ring
1045 steel casting
SEAL TEMPERATURE RANGE : -30°C / +100°C (-22°F / +212°F) SEAL MAXIMUM SPEED : 3 FT / SEC
ALL SEALS ARE TOP GRADE/FIRST QUALITY NORTH AMERICAN MADE ALL COMPONENTS ARE CNC MACHINED FOR HIGHER ACCURACY AND CONFORMITY QUALITY CONTROLLED IN CHINA BY QUALIFIED CANADIAN TECHNICIANS 100% TESTED. ALL CYLINDERS ARE SUBMITTED TO STATIC AND DYNAMIC PRESSURE TESTS TO RECOMMENDED SPECIFICATIONS
HYDRO CUSTOM IS NOT RESPONSIBLE FOR INCORRECT RESULTS OBTAINED WITH FIGURES IN THIS DOCUMENT. INFORMATION IS FOR REFERENCE ONLY. NO OTHER CONDITIONS ARE EXPRESSED OR IMPLIED.
PAGE 12
Made with FlippingBook flipbook maker