WELDED CYLINDERS - THROUGH HOLE TYPE
OUTSIDE DIAMETER
ROD DIAMETER A B
PORT SIZE*
MODEL CODE CYLINDER BORE WT3-15XX-S 1.50 WT3-20XX-S 2.00 WT3-25XX-S 2.50 WT3-30XX-S 3.00 WT3-35XX-S 3.50 WT3-40XX-S 4.00
C
D E*
F
G H
1.875 2.375 2.875
1.00 1.25
7.00 1.25 0.64 2.43 0.62 2.00 0.81 1.87 SAE-08 8.00 1.25 0.76 3.37 0.75 2.50 0.81 1.87 SAE-08 8.00 1.25 0.76 3.12 0.75 3.00 0.81 2.06 SAE-08 8.00 1.50 1.01 2.56 1.00 3.50 0.81 2.18 SAE-08 8.00 1.50 1.01 2.43 1.00 4.00 0.81 2.18 SAE-08 9.00 2.00 1.26 2.43 1.25 4.50 0.81 2.18 SAE-08
1.375
3.50 4.00 4.50
1.50 1.75 2.00
FOR 2" TO 4" BORE, 8" STROKE : A = 12.25", E = 5.12" * NPT PORTS ARE ALSO AVAILABLE FROM 1.5" TO 4" BORE CYLINDERS MAXIMUM RETRACTED WORKING PRESSURE : 3000 PSI MAXIMUM EXTENDED WORKING PRESSURE : SEE TABLE RETRACTED AND STROKE TOLERANCE ± 1/8"
DIMENSIONS
ROD DIAMETER PIN SIZE PORT SIZE
COLUMN LOADS (LBS)
PRESSURE (PSI)
WEIGHT (LBS)
MODEL CODE BORE X STROKE WT3-1504-S 1.5’’ X 4’’ WT3-1506-S 1.5’’ X 6’’ WT3-1508-S 1.5’’ X 8’’ WT3-1510-S 1.5’’ X 10’’ WT3-1512-S 1.5’’ X 12’’ WT3-1514-S 1.5’’ X 14’’ WT3-1516-S 1.5’’ X 16’’ WT3-2004-S 2’’ X 4’’ WT3-2006-S 2’’ X 6’’ WT3-2008-S 2’’ X 8’’ WT3-2010-S 2’’ X 10’’ WT3-2012-S 2’’ X 12’’ WT3-2014-S 2’’ X 14’’ WT3-2016-S 2’’ X 16’’ WT3-2018-S 2’’ X 18’’ WT3-2020-S 2’’ X 20’’ WT3-2024-S 2’’ X 24’’ WT3-2028-S 2’’ X 28’’ WT3-2030-S 2’’ X 30’’ WT3-2032-S 2’’ X 32’’ WT3-2036-S 2’’ X 36’’ WT3-2040-S 2’’ X 40’’ WT3-2042-S 2’’ X 42’’ WT3-2048-S 2’’ X 48’’ WT3-2060-S 2’’ X 60’’ WT3-2072-S 2’’ X 72’’
RETRACTED EXTENDED
11’’ 13’’ 15’’ 17’’ 19’’ 21’’ 23’’ 12’’ 14’’ 16’’ 18’’ 20’’ 22’’ 24’’ 26’’ 28’’ 32’’ 36’’ 38’’ 40’’ 44’’ 48’’ 50’’ 56’’ 68’’ 80’’
15’’ 19’’ 23’’ 27’’ 31’’ 35’’ 39’’ 16’’ 20’’ 24’’ 28’’ 32’’ 36’’ 40’’ 44’’ 48’’ 56’’ 64’’ 68’’ 72’’ 80’’ 88’’ 92’’
5300 5300 5300 5300 5300 5300 5300 9400 9400 9400 9400 9400 9400 9400 9400 9400 7300 5600 4900 4400 3500 2900 2700 2100 1400
3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 2300 1700 1500 1400 1100
7 8 9
1’’
5/8’’
SAE-06
11 12 13 14 11 12 14 16 17 19 21 22 24 27 31 33 34 38 41 43 48 58 68
1-1/4’’
3/4’’
SAE-08
900 800 600 400 300
104’’ 128’’ 152’’
900
COLUMN LOAD IS THE MAXIMUM PUSHING LOAD SUGGESTED USING A MINIMUM SAFETY FACTOR OF 2 AND BASED ON A PIN TO PIN MOUNTING CALCULATION.
HYDRO CUSTOM IS NOT RESPONSIBLE FOR INCORRECT RESULTS OBTAINED WITH FIGURES IN THIS DOCUMENT. INFORMATION IS FOR REFERENCE ONLY. NO OTHER CONDITIONS ARE EXPRESSED OR IMPLIED.
PAGE 13
Made with FlippingBook flipbook maker