WELDED CYLINDERS - THREADED CLEVIS TYPE
OUTSIDE DIAMETER
ROD DIAMETER
ROD THREAD*ABC D *E F G H I
MODEL CODE CYLINDER BORE
J K L PORT SIZE*
7/8-14 UNF 10.25 1.5 0.76 1.62 4.50 1.6 0.87 2.44 2.00 1.62 0.93 1.87 SAE-06
TCL15XX-S 1.50
1.875
1.00
1.12 1 1/8-12 UNF 10.25 2.0 1.01 2.00 3.62 2.0 1.14 2.44 2.50 2.12 0.81 2.06 SAE-08
TCL20XX-S 2.00
2.375
1.25 1 1/8-12 UNF 10.25 2.0 1.01 2.00 3.62 2.0 1.14 2.72 2.72 2.12 0.81 2.06 SAE-08
TCL25XX-S 2.50
2.875
1.50 1 1/4-12 UNF 10.25 2.0 1.01 2.00 3.62 2.0 1.14 2.72 2.72 2.12 0.87 2.18 SAE-08
TCL30XX-S 3.00
3.50
1.75 1 1/2-12 UNF 10.25 2.0 1.01 2.00 3.62 2.0 1.14 2.72 2.72 2.12 0.93 2.18 SAE-08
TCL35XX-S 3.50
4.00
2.00 1 1/2-12 UNF 10.25 2.0 1.01 2.12 3.62 2.0 1.14 2.72 2.95 2.12 1.00 2.18 SAE-08
TCL40XX-S 4.00
4.50
FOR 2" TO 4" BORE, 8" STROKE : A = 12.25", E = 5.12" * NPT PORTS ARE ALSO AVAILABLE FROM 1.5" TO 4" BORE CYLINDERS MAXIMUM RETRACTED WORKING PRESSURE : 3000 PSI MAXIMUM EXTENDED WORKING PRESSURE : SEE TABLE RETRACTED AND STROKE TOLERANCE ± 1/8"
DIMENSIONS
ROD DIAMETER PIN SIZE PORT SIZE*
COLUMN LOADS (LBS)
PRESSURE (PSI)
WEIGHT (LBS)
MODEL CODE BORE X STROKE TCL1504-S 1.5” X 4” TCL1506-S 1.5” X 6” TCL1508-S 1.5” X 8”
RETRACTED EXTENDED
14-1/4” 16-1/4” 18-1/4” 20-1/4” 20-1/4” 22-1/4” 24-1/4” 26-1/4” 28-1/4” 30-1/4” 34-1/4” 38-1/4” 40-1/4” 42-1/4” 44-1/4”
18-1/4” 22-1/4” 26-1/4” 28-1/4” 30-1/4” 34-1/4” 38-1/4” 42-1/4” 46-1/4” 50-1/4” 58-1/4” 66-1/4” 70-1/4” 74-1/4” 78-1/4”
5300 5300 5300 5300 5300 5300 5300 5200 4400 3700 2700 2100 1900 1700 1500 1300
3000 3000 3000 3000 3000 3000 3000 2900 2400 2100 1500 1200 1000
10 11 12 13 13 15 16 17 18 20 22 25 26 27 28 29
TCL1508-ASAE*
1.5” X 8”
TCL1510-S 1.5” X 10” TCL1512-S 1.5” X 12” TCL1514-S 1.5” X 14” TCL1516-S 1.5” X 16” TCL1518-S 1.5” X 18” TCL1520-S 1.5” X 20” TCL1524-S 1.5” X 24” TCL1528-S 1.5” X 28” TCL1530-S 1.5” X 30” TCL1532-S 1.5” X 32” TCL1534-S 1.5” X 34”
1’’
3/4’’
SAE-06
900 800 700
COLUMN LOAD IS THE MAXIMUM PUSHING LOAD SUGGESTED USING A MINIMUM SAFETY FACTOR OF 2 AND BASED ON A PIN TO PIN MOUNTING CALCULATION. * ASAE = AMERICAN SOCIETY OF AGRICULTURE ENGINEERS DESIGNATES AN INDUSTRY MOUNTING STANDARD FOR 8” AND 16” STROKE CYLINDERS TCL1536-S 1.5” X 36” 46-1/4” 82-1/4”
HYDRO CUSTOM IS NOT RESPONSIBLE FOR INCORRECT RESULTS OBTAINED WITH FIGURES IN THIS DOCUMENT. INFORMATION IS FOR REFERENCE ONLY. NO OTHER CONDITIONS ARE EXPRESSED OR IMPLIED.
PAGE 17
Made with FlippingBook flipbook maker