TIE-ROD CYLINDERS - 2500 PSI
DIMENSIONS
ROD DIAMETER PIN SIZE
PORT SIZE
COLUMN LOADS (LBS)
PRESSURE (PSI)
WEIGHT (LBS)
MODEL CODE BORE X STROKE
RETRACTED EXTENDED
TR2.5-4004-S TR2.5-4006-S TR2.5-4008-S
4” X 4” 4” X 6” 4” X 8” 4” X 8” 4” X 10” 4” X 12” 4” X 14” 4” X 16” 4” X 16” 4” X 18” 4” X 20” 4” X 24”
14 1/4” 16 1/4” 18 1/4” 20 1/4” 20 1/4” 22 1/4” 24 1/4” 26 1/4” 31 1/2” 28 1/4” 30 1/4” 34 1/4” 34 1/4” 34 1/4” 40 1/4” 46 1/4” 50 1/4” 58 1/4”
18 1/4” 22 1/4” 26 1/4” 28 1/4” 30 1/4” 34 1/4” 38 1/4” 42 1/4” 47 1/2” 46 1/4” 50 1/4” 58 1/4” 58 1/4” 58 1/4” 70 1/4” 82 1/4” 90 1/4” 106 1/4”
31400 31400 31400 31400 31400 31400 31400 26700 31400 22300 18800 14000 26000 31400 30500 22200 18200 13200
2500 2500 2500 2500 2500 2500 2500 2100 2500 1700 1500 1100 2050 2500 2400 1700 1400 1000
33 36 38 39 41 44 46 49 63 55 58 64 68 73 84 95
TR2.5-4008-ASAE-S*
1 1/2”
1”
TR2.5-4010-S TR2.5-4012-S TR2.5-4014-S TR2.5-4016-S
TR2.5-4016-ASAE-S*
2”
1 1/4”
SAE-08
TR2.5-4018-S TR2.5-4020-S TR2.5-4024-S
1 1/2”
TR2.5-4024-175-S 4” X 24” TR2.5-4024-200-S 4” X 24”
1 3/4”
1”
TR2.5-4030-S TR2.5-4036-S TR2.5-4040-S TR2.5-4048-S
4” X 30” 4” X 36” 4” X 40” 4” X 48”
2”
103 118
COLUMN LOAD IS THE MAXIMUM PUSHING LOAD SUGGESTED USING A MINIMUM SAFETY FACTOR OF 2 AND BASED ON A PIN TO PIN MOUNTING CALCULATION. * ASAE = AMERICAN SOCIETY OF AGRICULTURE ENGINEERS DESIGNATES AN INDUSTRY MOUNTING STANDARD FOR 8” AND 16” STROKE CYLINDERS
Double lip U-cup rod seal
Heavy duty Grade 8 (100,000 psi. Yield) piston nuts, torqued to specifications and held with thread/locker sealant or lock nut
Special snap-in type wiper seals, specially designed to prevent exterior contamination and moisture ingress. Molded ribs provide extra stability to the seal and help prevent pressure trapping
Double-acting piston seal with single-acting capabilities
Ductile iron
Ductile iron
Ductile iron
Gloss black paint over primer
Dual seal replacing back up and O-Ring
1045 steel rod. Chrome plated rods. 90 hrs minimum on ASTM B117-02 procedure salt spray tests.
SEAL TEMPERATURE RANGE: -30˚C / +100˚C ( -22˚F / +212˚F ) SEAL MAXIMUM SPEED: 3 FT / SEC
All seals are top grade/first quality North American made All components are CNC machined for higher accuracy and conformity Quality controlled in China by qualified Canadian technicians 100% tested. All cylinders are submitted to static and dynamic pressure tests to recommended specifications
PAGE 23
Made with FlippingBook flipbook maker