TIE-ROD CYLINDERS - 3000 PSI
OUTSIDE DIAMETER ROD THREAD A 2
PORT SIZE*
MODEL CODE CYLINDER BORE
B C 3
D 4
E 5
F G H I
J 4
TR3-20XX TR3-25XX TR3-30XX TR3-35XX TR3-40XX TR3-50XX
2.00 2.50 3.00 3.50 4.00 5.00
2.38 2.89 3.39 4.00 4.50 5.50
1 1/8-12 UNF 10.25 2.00 1.01 2.00 4.17 2.44 1.14 2.00 2.12 2.50 SAE-08 1 1/8-12 UNF 10.25 2.00 1.01 2.00 4.17 2.44 1.14 2.00 2.12 2.50 SAE-08 1 1/4-12 UNF 10.25 2.00 1.01 2.00 4.14 2.72 1.14 2.00 2.12 2.72 SAE -08 1 1/4-12 UNF 10.25 2.00 1.01 2.00 4.09 2.72 1.14 2.00 2.12 2.72 SAE-08 1 1/4-12 UNF 10.25 2.00 1.01 2.00 3.82 2.72 1.14 2.12 2.12 2.72 SAE-08 1 1/2-12 UNF 12.25 2.75 1.26 2.75 5.00 2.87 1.25 2.12 2.12 2.95 SAE-10
1. FOR 8.00" ASAE STROKE : A = 12.25" FOR 16.00" ASAE STROKE : A = 15.50" 2. FOR 16.00" ASAE STROKE : C = 1.26" 3. FOR 8.00" ASAE STROKE : E = 5.75" (2.00" TO 3.00" BORE), E = 5.62" (3.50" BORE) E = 5.56'' (4.00" BORE) FOR 16.00" ASAE STROKE : E = 9.00" (3.00" BORE) E = 8.87" (3.50" BORE) E = 8.81'' (4.00" BORE) E = 7.43" (5.00" BORE) 4. FOR 5.00" BORE : G (FRONT CLEVIS) = 1.18" G (END CAP) = 1.31"
MAXIMUM RETRACTED WORKING PRESSURE = 3000 PSI MAXIMUM EXTENDED WORKING PRESSURE = SEE TABLE RETRACTED AND STROKE TOLERANCE ± 1/8'' DIMENSIONS A AND E ARE FOR REFERENCES ONLY AS CLEVIS IS ADJUSTABLE * NPT PORTS ARE ALSO AVAILABLE.
DIMENSIONS
ROD DIAMETER PIN SIZE
PORT SIZE*
COLUMN LOADS (LBS)
PRESSURE (PSI)
WEIGHT (LBS)
MODEL CODE BORE X STROKE
RETRACTED EXTENDED
TR3-2004 TR3-2006 TR3-2008
2” X 4” 2” X 6” 2” X 8” 2” X 8” 2” X 10” 2” X 12” 2” X 14” 2” X 16” 2” X 18” 2” X 20” 2” X 24” 2” X 30” 2” X 36”
14-1/4” 16-1/4” 18-1/4” 20-1/4” 20-1/4” 22-1/4” 24-1/4” 26-1/4” 28-1/4” 30-1/4” 34-1/4” 40-1/4” 46-1/4”
18-1/4” 22-1/4” 26-1/4” 28-1/4” 30-1/4” 34-1/4” 38-1/4” 42-1/4” 46-1/4” 50-1/4” 58-1/4” 70-1/4” 82-1/4”
9400 9400 9400 9400 9400 9400 9400 8400 7000 5900 4400 3000 2200
3000 3000 3000 3000 3000 3000 3000 2600 2200 1900 1400
17 19 21 22 23 25 27 28 30 32 36 41 47
TR3-2008-ASAE*
TR3-2010 TR3-2012 TR3-2014 TR3-2016 TR3-2018 TR3-2020 TR3-2024 TR3-2030 TR3-2036
1-1/8”
1”
SAE-08
900 700
COLUMN LOAD IS THE MAXIMUM PUSHING LOAD SUGGESTED USING A MINIMUM SAFETY FACTOR OF 2 AND BASED ON A PIN TO PIN MOUNTING CALCULATION. * ASAE = AMERICAN SOCIETY OF AGRICULTURE ENGINEERS DESIGNATES AN INDUSTRY MOUNTING STANDARD FOR 8” AND 16” STROKE CYLINDERS
HYDRO CUSTOM IS NOT RESPONSIBLE FOR INCORRECT RESULTS OBTAINED WITH FIGURES IN THIS DOCUMENT. INFORMATION IS FOR REFERENCE ONLY. NO OTHER CONDITIONS ARE EXPRESSED OR IMPLIED.
PAGE 24
Made with FlippingBook flipbook maker