CYLINDERS COMPONENTS
C
D
F
FEMALE CLEVIS
G
E
C
D
A
F
G
E
B
A
DIMENSIONS (IN)
MAXIMUM LOAD PUSH / PULL (LBS)
MODEL CODE
A
B
C
D
E
F
G
B
CL-100075-CLP CL-125100-CLP CL-175100-CLP CL-200100-CLP CL-250150-CLP
1.50 2.00 2.00 2.00 3.00
0.76 1.01 1.01 1.01 1.51
1.75 2.62 2.62 2.62 3.00
1.37 2.12 2.12 2.00 2.25
0.87 1.12 1.12 1.12 1.62
0.37 0.50 0.62 0.62 0.75
1.62 2.12 2.37 2.37 3.12
5300
22500 28100 28100 50600
MATERIAL : C1045 CAST STEEL MAXIMUM PUSHING & PULLING FORCE ARE BASED ON A SUGGESTED MINIMUM SAFETY FACTOR OF 2
D
E
THREADED CLEVIS
G
F
THREAD
D
B
E
G
F
THREAD
C
A
B
DIMENSIONS (IN)
MAXIMUM LOAD PUSH / PULL (LBS)
MODEL CODE
THREAD
A
B
C
D
E
F
G
C
A
ST-0870718-CVP ST-1121020-CVP ST-1121022-CVP ST-1121222-CVP ST-1251022-CVP ST-1311025-CVP ST-1311225-CVP ST-1501025-CVP ST-1501225-CVP ST-1501226-CVP
7/8-14 UNF 2.75 1 1/8-12 UNF 3.25 1 1/8-12 UNF 3.25 1 1/8-12 UNF 3.25 1 1/4-12 UNF 3.25 1 5/16-12 UN 3.25 1 5/16-12 UN 3.25 1 1/2-12 UNF 3.25 1 1/2-12 UNF 3.25 1 1/2-12 UNF 3.62
1.87 2.00 2.25 2.25 2.25 2.50 2.50 2.50 2.50 2.75
0.76 1.01 1.01 1.26 1.01 1.01 1.26 1.01 1.26 1.26
1.62 2.12 2.12 2.12 2.12 2.12 2.12 2.12 2.12 2.12
0.56 0.75 0.75 0.75 0.75 0.81 0.81 0.81 0.81 1.06
0.87 1.12 1.12 1.12 1.12 1.12 1.12 1.12 1.12 1.18
2.00 2.62 2.62 2.62 2.62 2.75 2.75 2.75 2.75 3.31
5300
23000 23000 23000 23000 33700 33700 33700 33700 58900
MATERIAL : C1045 CAST STEEL / DUCTILE IRON MAXIMUM PUSHING & PULLING FORCE ARE BASED ON A SUGGESTED MINIMUM SAFETY FACTOR OF 2
HYDRO CUSTOM IS NOT RESPONSIBLE FOR INCORRECT RESULTS OBTAINED WITH FIGURES IN THIS DOCUMENT. INFORMATION IS FOR REFERENCE ONLY. NO OTHER CONDITIONS ARE EXPRESSED OR IMPLIED.
PAGE 30
Made with FlippingBook flipbook maker