CYLINDERS COMPONENTS
END CAP CLEVIS
G
G
H
H
B A
B A
I
C
I
C
E
E
F
F
D
J
D
J
DIMENSIONS (IN)
MAXIMUM LOAD PUSH / PULL (LBS)
MODEL CODE
BORE A B C D E
F
G H I
J
CL-15075-CAP CL-20100-CAP CL-25100-CAP CL-30100-CAP CL-35100-CAP CL-40100-CAP CL-50150-CAP
1.50 1.62 0.87 0.37 2.00 1.50 0.76 1.87 2.00 2.12 1.12 0.50 2.50 2.00 1.01 2.62 2.50 2.12 1.12 0.50 3.00 2.00 1.01 2.62 3.00 2.12 1.12 0.50 3.50 2.00 1.01 2.62
- - - -
1.37 0.12 2.12 0.12 2.12 0.12 2.12 0.12
5300 9500
14750 22500 28100 28100 50600
3.50 2.37 1.12 0.62 4.00 2.00 1.01 2.62 2.12 2.00 0.12 4.00 2.37 1.12 0.62 4.50 2.00 1.01 2.50 2.00 1.75 0.12
5.00 3.12 1.62 0.75 5.50 3.00 1.51 3.12
-
2.25 0.25
MATERIAL : C1045 CAST STEEL MAXIMUM PUSHING / PULLING FORCE ARE BASED ON A SUGGESTED MINIMUM SAFETY FACTOR OF 2
PINS
B
C
A
E TYP. 2X
P. 2X
DIMENSIONS (IN)
MAXIMUM LOAD PUSH / PULL (LBS) FOR MODELS
MODEL CODE
A
B
C
D & E
C
075175-PNP 075212-PNP 100237-PNP 100262-PNP 100275-PNP 100287-PNP 125350-PNP 150337-PNP
0.750 0.750 1.000 1.000 1.000 1.000 1.250 1.500
1.87 2.25 2.50 2.75 2.87 3.00 3.62 3.56
1.75 2.12 2.37 2.62 2.75 2.87 3.50 3.37
0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.18
2.38 2.62 3.00 3.25 3.28 3.63 4.12 4.12
15700 15700 28100 28100 28100 28100 50500 63100
CL15, TCL15 CAP
TCL15 FRONT CLEVIS
CL20, CL25, CL30
CL35, CL40
TR2.5, TR3-20/25/30
TCL, TR3-35/40
TRxx-xx16-ASAE, TR3-50
CL50
MATERIAL : C1045 STEEL ZINC PLATED MAXIMUM PUSHING / PULLING FORCE ARE BASED ON A SUGGESTED MINIMUM SAFETY FACTOR OF 2
HYDRO CUSTOM IS NOT RESPONSIBLE FOR INCORRECT RESULTS OBTAINED WITH FIGURES IN THIS DOCUMENT. INFORMATION IS FOR REFERENCE ONLY. NO OTHER CONDITIONS ARE EXPRESSED OR IMPLIED.
PAGE 34
Made with FlippingBook flipbook maker