Hydrolico-2024-241004

LOW SPEED HIGH TORQUE MOTORS - BM1 SERIE

BM1 SERIES MOTOR IS A SMALL VOLUME, SPOOL VALVE GEROLOR GEAR SET, ECONOMICAL TYPE MOTOR CHARACTERISTIC FEATURES • COMPACT DESIGN OF SPOOL AND GEAR SET, WHICH PROVIDE SMALL VOLUME, HIGH POWER AND LOW WEIGHT • DIRECTION OF SHAFT ROTATION AND SPEED CAN BE CONTROLLED EASILY AND SMOOTHLY • BEST COMBINATION OF EFFICIENCY AND ECONOMY IN MEDIUM LOAD APPLICATIONS • STANDARD SHAFT SEALS RATED AT 1900 PSI • NEW, ON MANY SERIES, HIGH PRESSURE SHAFT SEALS UP TO 2900 PSI, AVAILABLE UPON REQUEST

MAIN SPECIFICATIONS

DISPLACEMENT IN³ (CM³) / REV.

3.0 (50)

4.8 (80)

6.1 (100)

7.6 (125)

9.7 (160)

12.2 (200)

15.2 (250)

19.2 (315)

24.4 (400)

CONT.

12

12

15 20

15 20

15 20

15 20

15 20

15 20

15 20

FLOW (GPM)

INT.

14.5 716 955 2030 2537

14.5 750 900 2030 2537 1140 1503 1630 0.57 5.81

CONT.

550 673

450 560

360 430

280 350

220 270

189 236

140 180

SPEED (RPM)

INT.

CONT.

2030 2537 1423 1874 1990 0.70 5.95 6.14

2030 2537 1812 2343 2681 0.91 6.14 6.34

2030 2537 2166 3014 3441 1.14 6.38 6.58

2030 2537 2519 3448 3967 1.46 6.69 6.89

1595 2030 3182 4022 4113 1.81 7.07 7.26

1305 2030 3589 4464 4885 2.24 7.50 7.70

1015 1522 3845 4694 4922 2.84 8.07 8.27

PRESSURE (PSI)

INT.

CONT.

734 955

TORQUE (LB-IN)

INT.

PEAK

1014 0.35 5.63 5.83

L

LENGTH (IN)

L1 L2

6

NOTES 1. CONTINUOUS DATA: THE MAX. VALUE OF OPERATING MOTOR CONTINUOUSLY. 2. INTERMITTENT DATA: THE MAX. VALUE OF OPERATING MOTOR IS 10 % PER MINUTE. 3. A SIMULTANEOUS MAX. RPM AND MAX. PRESSURE IS NOT RECOMMENDED. 4. OPTIMUM OPERATING SITUATION SHOULD BE AT THE 1/3~2/3 OF THE CONTINUOUS OPERATION.

MODEL CODES

TYPE H PORT CONFIGURATION - SIDE LOAD BEARING OPTION

3.0 (50)

4.8 (80)

6.1 (100)

7.6 (125)

9.7 (160)

12.2 (200)

15.2 (250)

19.2 (315)

24.4 (400)

FLANGE SHAFT PORT SIZE

1” STRAIGHT SAE-10 316-0400H 316-0402H 316-0403H 316-0409H 316-0404H 316-0405H 316-0406H 316-0408H 316-0407H 1/2 NPT 316-0390H 316-0392H 316-0393H 316-0399H 316-0394H 316-0395H 316-0396H 316-0398H 316-0397H 1”-6T SPLINE SAE-10 316-0800H 316-0802H 316-0803H 316-0809H 316-0804H 316-0805H 316-0806H 316-0808H 316-0807H 1/2 NPT 316-0820H 316-0822H 316-0823H 316-0829H 316-0824H 316-0825H 316-0826H 316-0828H 316-0827H 1” STRAIGHT SAE-10 316-0500H 316-0502H 316-0503H 316-0509H 316-0504H 316-0505H 316-0506H 316-0508H 316-0507H 1/2 NPT 316-0420H 316-0422H 316-0423H 316-0429H 316-0424H 316-0425H 316-0426H 316-0428H 316-0427H 1”-6T SPLINE SAE-10 316-0900H 316-0902H 316-0903H 316-0909H 316-0904H 316-0905H 316-0906H 316-0908H 316-0907H 1/2 NPT 316-0920H 316-0922H 316-0923H 316-0929H 316-0924H 316-0925H 316-0926H 316-0928H 316-0927H

2 BOLT

4 BOLT

TYPE S PORT CONFIGURATION FLANGE SHAFT PORT SIZE 3.0 (50)

4.8 (80)

6.1 (100)

7.6 (125)

9.7 (160)

12.2 (200)

15.2 (250)

19.2 (315)

24.4 (400)

1” STRAIGHT SAE-10 313-0400 313-0402 313-0403 313-0409 313-0404 313-0405 313-0406 313-0408 313-0407 1/2 NPT 313-0390 313-0392 313-0393 313-0399 313-0394 313-0395 313-0396 313-0398 313-0397 1”-6T SPLINE SAE-10 313-0800 313-0802 313-0803 313-0809 313-0804 313-0805 313-0806 313-0808 313-0807 1/2 NPT 313-1270 313-1272 313-1273 313-1279 313-1274 313-1275 313-1276 313-1278 313-1277 1” STRAIGHT SAE-10 313-0500 313-0502 313-0503 313-0509 313-0504 313-0505 313-0506 313-0508 313-0507 1/2 NPT 313-0420 313-0422 313-0423 313-0429 313-0424 313-0425 313-0426 313-0428 313-0427 1”-6T SPLINE SAE-10 313-0900 313-0902 313-0903 313-0909 313-0904 313-0905 313-0906 313-0908 313-0907 1/2 NPT 313-0920 313-0922 313-0923 313-0929 313-0924 313-0925 313-0926 313-0928 313-0927 1" STRAIGHT SAE-10 317-0250 317-0252 317-0253 317-0259 317-0254 317-0255 317-0256 317-0258 317-0257

2 BOLT

4 BOLT

4 BOLT + BEARING

PAGE 40

Made with FlippingBook flipbook maker