LOW SPEED HIGH TORQUE MOTORS - BMT SERIE
BMT IS A LARGE VOLUME DISC VALVE, HIGH PRESSURE MOTOR, WITH RADIAL BALL-BEARINGS DESIGN, AND CAN BEAR GREATER LOAD. CHARACTERISTIC FEATURES • THE MOTOR CAN BE USED IN HIGH PRESSURE AND HIGH TORQUE • ADVANCED DESIGN IN DISC DISTRIBUTION FLOW, WHICH CAN PROVIDE IMPROVED PERFORMANCE AT LOW SPEED • THE VALVE CAN AUTOMATICALLY COMPENSATE FOR THE WEAR, SO THE VOLUMETRIC EFFICIENCY IS HIGH • DOUBLE TAPER ROLLER BEARINGS PERMIT HIGH RADIAL LOADS. THE MOTORS CAN BE USED ON HEAVIER VEHICLES IN TRACTION DRIVE APPLICATIONS
MAIN SPECIFICATIONS
DISPLACEMENT IN³ (CM³) / REV.
15.2 (250)
19.2 (315)
24.3 (400)
30.4 (500)
38.4 (630)
48.7 (800)
CONT.
33
33
33
33
33
33
FLOW (GPM)
INT.
40
40
40
40
40
40
CONT.
495
380
302
237
196
154
SPEED (RPM)
INT.
592
458
364
284
233
185
CONT.
2900
2900
2600
2320
2030
1812
PRESSURE (PSI)
INT.
3480
3480
3045
2610
2320
1885
CONT.
6435
8515
9691
11020
11665
12958
TORQUE (LB-IN)
INT.
7860
10214
11231
12471
13258
13453
LENGHT (IN)
L
8.37
8.58
8.86
9.17
9.65
10.22
NOTES 1. CONTINUOUS DATA: THE MAX. VALUE OF OPERATING MOTOR CONTINUOUSLY. 2. INTERMITTENT DATA: THE MAX. VALUE OF OPERATING MOTOR IN 6 SECONDS PER MINUTE.
3. A SIMULTANEOUS MAX. RPM AND MAX. PRESSURE IS NOT RECOMMENDED. 4. THE CONVERSION FACTORS IS ON THE PAGE 4, CONSULT IT PLEASE. 5. OPTIMUM OPERATING SITUATION SHOULD BE AT THE 1/3~2/3 OF THE CONTINUOUS OPERATING SITUATION.
MODEL CODES
FLANGE 48.7 (800) SAE-C 4 BOLT 1 1/2” STRAIGHT 370-0141 370-0142 370-0143 370-0144 370-0145 370-0146 OTHER MOUNTINGS AND SHAFTS AVAILABLE SHAFT 15.2 (250) 19.2 (315) 24.3 (400) 30.4 (500) 38.4 (630)
DIMENSIONS
4- Ø 0.57
Ø 6.38
2- SAE-12
0.39
2.26
SAE-06
3/8-16
3.09
0.35
0.70
1.61 0.90
1.22
2.36
4.45
L
PAGE 48
Made with FlippingBook flipbook maker