Hydrolico-2024-241004

LOW SPEED HIGH TORQUE MOTORS - BMT SERIE

BMT IS A LARGE VOLUME DISC VALVE, HIGH PRESSURE MOTOR, WITH RADIAL BALL-BEARINGS DESIGN, AND CAN BEAR GREATER LOAD. CHARACTERISTIC FEATURES • THE MOTOR CAN BE USED IN HIGH PRESSURE AND HIGH TORQUE • ADVANCED DESIGN IN DISC DISTRIBUTION FLOW, WHICH CAN PROVIDE IMPROVED PERFORMANCE AT LOW SPEED • THE VALVE CAN AUTOMATICALLY COMPENSATE FOR THE WEAR, SO THE VOLUMETRIC EFFICIENCY IS HIGH • DOUBLE TAPER ROLLER BEARINGS PERMIT HIGH RADIAL LOADS. THE MOTORS CAN BE USED ON HEAVIER VEHICLES IN TRACTION DRIVE APPLICATIONS

MAIN SPECIFICATIONS

DISPLACEMENT IN³ (CM³) / REV.

15.2 (250)

19.2 (315)

24.3 (400)

30.4 (500)

38.4 (630)

48.7 (800)

CONT.

33

33

33

33

33

33

FLOW (GPM)

INT.

40

40

40

40

40

40

CONT.

495

380

302

237

196

154

SPEED (RPM)

INT.

592

458

364

284

233

185

CONT.

2900

2900

2600

2320

2030

1812

PRESSURE (PSI)

INT.

3480

3480

3045

2610

2320

1885

CONT.

6435

8515

9691

11020

11665

12958

TORQUE (LB-IN)

INT.

7860

10214

11231

12471

13258

13453

LENGHT (IN)

L

8.37

8.58

8.86

9.17

9.65

10.22

NOTES 1. CONTINUOUS DATA: THE MAX. VALUE OF OPERATING MOTOR CONTINUOUSLY. 2. INTERMITTENT DATA: THE MAX. VALUE OF OPERATING MOTOR IN 6 SECONDS PER MINUTE.

3. A SIMULTANEOUS MAX. RPM AND MAX. PRESSURE IS NOT RECOMMENDED. 4. THE CONVERSION FACTORS IS ON THE PAGE 4, CONSULT IT PLEASE. 5. OPTIMUM OPERATING SITUATION SHOULD BE AT THE 1/3~2/3 OF THE CONTINUOUS OPERATING SITUATION.

MODEL CODES

FLANGE 48.7 (800) SAE-C 4 BOLT 1 1/2” STRAIGHT 370-0141 370-0142 370-0143 370-0144 370-0145 370-0146 OTHER MOUNTINGS AND SHAFTS AVAILABLE SHAFT 15.2 (250) 19.2 (315) 24.3 (400) 30.4 (500) 38.4 (630)

DIMENSIONS

4- Ø 0.57

Ø 6.38

2- SAE-12

0.39

2.26

SAE-06

3/8-16

3.09

0.35

0.70

1.61 0.90

1.22

2.36

4.45

L

PAGE 48

Made with FlippingBook flipbook maker