LOW SPEED HIGH TORQUE MOTORS - BM6 SERIE
BM6 IS A LARGE VOLUME, DISC VALVE, HIGH PRESSURE MOTOR, WITH RADIAL BALL-BEARINGS DESIGN AND CAN BEAR GREATER LOAD, AND HAS HIGHER TORQUE CAPABILITIES THAN OUR BM5 CHARACTERISTIC FEATURES • THE MOTOR CAN BE USED IN HIGH PRESSURE AND HIGH TORQUE • ADVANCED DESIGN IN DISC DISTRIBUTION FLOW,WHICH CAN PROVIDE IMPROVED PERFORMANCE AT LOW SPEED • THE VALVE CAN AUTOMATICALLY COMPENSATE FOR THE WEAR, SO THE VOLUMETRIC EFFICIENCY IS HIGH • DOUBLE TAPER ROLLER BEARINGS PERMIT HIGH RADIAL LOADS. THE MOTORS CAN BE USED ON HEAVIER VEHICLES IN TRACTION DRIVE APPLICATIONS
MAIN SPECIFICATIONS
DISPLACEMENT IN³ (CM³) / REV.
11.8 (195)
14.9 (245)
18.9 (310)
24.0 (395)
29.8 (490)
38.1 (625)
48.7 (800)
60.0 (985)
CONT.
40
40
40
40
40
40
40
40
FLOW (GPM)
INT.
45
55
60
60
60
60
60
60
CONT.
775
615
485
383
307
241
184
153
SPEED (RPM)
INT.
866
834
698
563
454
355
276
230
CONT.
2975
2975
2975
2975
2450
2030
1740
1740
PRESSURE (PSI)
INT.
4500
4500
4500
4500
3990
2465
2030
2030
CONT.
5083
6497
8212
10051
10723
11731
12483
13852
TORQUE (LB-IN)
INT.
7602
10440
11934
14453
16619
12155
14551
16540
LENGHT (IN)
L3
10.15
10.35
10.63
11.02
11.42
12.00
12.83
13.58
NOTES 1. CONTINUOUS DATA: THE MAX. VALUE OF OPERATING MOTOR CONTINUOUSLY. 2. INTERMITTENT DATA: THE MAX. VALUE OF OPERATING MOTOR IN 6 SECONDS PER MINUTE.
3. A SIMULTANEOUS MAX. RPM AND MAX. PRESSURE IS NOT RECOMMENDED. 4. THE CONVERSION FACTORS IS ON THE PAGE 4, CONSULT IT PLEASE. 5. OPTIMUM OPERATING SITUATION SHOULD BE AT THE 1/3~2/3 OF THE CONTINUOUS OPERATING SITUATION.
MODEL CODES
11.8 (195)
14.9 (245)
18.9 (310)
24.00 (395)
29.8 (490)
38.1 (625)
48.7 (800)
60.0 (985)
FLANGE
SHAFT
SAE-C 4 BOLT 1 1/2” STRAIGHT 361-0181
361-0182
361-0183
361-0184
361-0185
361-0186
361-0188
361-0187
OTHER MOUNTINGS AND SHAFTS AVAILABLE
DIMENSIONS
L
SAE-06
2.87
4 - Ø0.57
Ø6.38
0.48
1.65
3/8-16
2.24
2- SAE-16
1.47
2.86
PAGE 49
Made with FlippingBook flipbook maker