Hydrolico-2024-241004

LOW SPEED HIGH TORQUE MOTORS - BM6 SERIE

BM6 IS A LARGE VOLUME, DISC VALVE, HIGH PRESSURE MOTOR, WITH RADIAL BALL-BEARINGS DESIGN AND CAN BEAR GREATER LOAD, AND HAS HIGHER TORQUE CAPABILITIES THAN OUR BM5 CHARACTERISTIC FEATURES • THE MOTOR CAN BE USED IN HIGH PRESSURE AND HIGH TORQUE • ADVANCED DESIGN IN DISC DISTRIBUTION FLOW,WHICH CAN PROVIDE IMPROVED PERFORMANCE AT LOW SPEED • THE VALVE CAN AUTOMATICALLY COMPENSATE FOR THE WEAR, SO THE VOLUMETRIC EFFICIENCY IS HIGH • DOUBLE TAPER ROLLER BEARINGS PERMIT HIGH RADIAL LOADS. THE MOTORS CAN BE USED ON HEAVIER VEHICLES IN TRACTION DRIVE APPLICATIONS

MAIN SPECIFICATIONS

DISPLACEMENT IN³ (CM³) / REV.

11.8 (195)

14.9 (245)

18.9 (310)

24.0 (395)

29.8 (490)

38.1 (625)

48.7 (800)

60.0 (985)

CONT.

40

40

40

40

40

40

40

40

FLOW (GPM)

INT.

45

55

60

60

60

60

60

60

CONT.

775

615

485

383

307

241

184

153

SPEED (RPM)

INT.

866

834

698

563

454

355

276

230

CONT.

2975

2975

2975

2975

2450

2030

1740

1740

PRESSURE (PSI)

INT.

4500

4500

4500

4500

3990

2465

2030

2030

CONT.

5083

6497

8212

10051

10723

11731

12483

13852

TORQUE (LB-IN)

INT.

7602

10440

11934

14453

16619

12155

14551

16540

LENGHT (IN)

L3

10.15

10.35

10.63

11.02

11.42

12.00

12.83

13.58

NOTES 1. CONTINUOUS DATA: THE MAX. VALUE OF OPERATING MOTOR CONTINUOUSLY. 2. INTERMITTENT DATA: THE MAX. VALUE OF OPERATING MOTOR IN 6 SECONDS PER MINUTE.

3. A SIMULTANEOUS MAX. RPM AND MAX. PRESSURE IS NOT RECOMMENDED. 4. THE CONVERSION FACTORS IS ON THE PAGE 4, CONSULT IT PLEASE. 5. OPTIMUM OPERATING SITUATION SHOULD BE AT THE 1/3~2/3 OF THE CONTINUOUS OPERATING SITUATION.

MODEL CODES

11.8 (195)

14.9 (245)

18.9 (310)

24.00 (395)

29.8 (490)

38.1 (625)

48.7 (800)

60.0 (985)

FLANGE

SHAFT

SAE-C 4 BOLT 1 1/2” STRAIGHT 361-0181

361-0182

361-0183

361-0184

361-0185

361-0186

361-0188

361-0187

OTHER MOUNTINGS AND SHAFTS AVAILABLE

DIMENSIONS

L

SAE-06

2.87

4 - Ø0.57

Ø6.38

0.48

1.65

3/8-16

2.24

2- SAE-16

1.47

2.86

PAGE 49

Made with FlippingBook flipbook maker