LOW SPEED HIGH TORQUE MOTORS - BMV SERIE
BMV IS A DISC VALVE, HIGH PRESSURE MOTOR, WITH RADIAL BALL-BEARINGS DESIGN AND EFFICIENT PERFORMANCE WHICH CAN BEAR GREATER LOAD THAN BMT. ITS FIGURATION IS BIGGER THAN BMT . CHARACTERISTIC FEATURES • THE MOTOR CAN BE USED IN HIGH PRESSURE AND HIGH TORQUE • ADVANCED DESIGN IN DISC DISTRIBUTION FLOW,WHICH CAN PROVIDE IMPROVED PERFORMANCE AT LOW SPEED • THE VALVE CAN AUTOMATICALLY COMPENSATE FOR THE WEAR, SO THE VOLUMETRIC EFFICIENCY IS HIGH • DOUBLE TAPER ROLLER BEARINGS PERMIT HIGH RADIAL LOADS. THE MOTORS CAN BE USED ON HEAVIER VEHICLES IN TRACTION DRIVE APPLICATIONS
MAIN SPECIFICATIONS
DISPLACEMENT IN³ (CM³) / REV.
19.2 (315)
24.3 (400)
30.4 (500)
38.4 (630)
48.7 (800)
60.9 (1000)
CONT.
42
53
53
53
53
53
FLOW (GPM)
INT.
53
63
63
63
63
63
CONT.
510
500
400
320
250
200
SPEED (RPM)
INT.
630
600
480
380
300
240
CONT.
3045
3045
3045
3045
3045
3045
PRESSURE (PSI)
INT.
3625
3625
3625
3625
3625
3625
CONT.
7213
10502
13039
14869
15824
17813
TORQUE (LB-IN)
INT.
9892
12659
15611
17371
17689
20155
LENGHT (IN)
L
8.38
8.66
8.98
9.44
10.02
10.65
NOTES 1. CONTINUOUS DATA: THE MAX. VALUE OF OPERATING MOTOR CONTINUOUSLY. 2. INTERMITTENT DATA: THE MAX. VALUE OF OPERATING MOTOR IN 6 SECONDS PER MINUTE.
3. A SIMULTANEOUS MAX. RPM AND MAX. PRESSURE IS NOT RECOMMENDED. 4. THE CONVERSION FACTORS IS ON THE PAGE 4, CONSULT IT PLEASE. 5. OPTIMUM OPERATING SITUATION SHOULD BE AT THE 1/3~2/3 OF THE CONTINUOUS OPERATING SITUATION.
MODEL CODES
FLANGE 60.9 (1000) SAE-C 4 BOLT 2 1/4” STRAIGHT 381-0021 381-0022 381-0023 381-0024 381-0025 381-0026 OTHER MOUNTINGS AND SHAFTS AVAILABLE SHAFT 19.2 (315) 24.3 (400) 30.4 (500) 38.4 (630) 48.7 (800)
DIMENSIONS
Ø 6.38
4 - Ø0.67
0.94
0.53
0.94
0.38
2.15
0.5
SAE-06
3/8-16
1.77
2 - SAE-16
3.19
L
3.82
PAGE 50
Made with FlippingBook flipbook maker