Hydrolico-2024-241004

LOW SPEED HIGH TORQUE MOTORS - BMV SERIE

BMV IS A DISC VALVE, HIGH PRESSURE MOTOR, WITH RADIAL BALL-BEARINGS DESIGN AND EFFICIENT PERFORMANCE WHICH CAN BEAR GREATER LOAD THAN BMT. ITS FIGURATION IS BIGGER THAN BMT . CHARACTERISTIC FEATURES • THE MOTOR CAN BE USED IN HIGH PRESSURE AND HIGH TORQUE • ADVANCED DESIGN IN DISC DISTRIBUTION FLOW,WHICH CAN PROVIDE IMPROVED PERFORMANCE AT LOW SPEED • THE VALVE CAN AUTOMATICALLY COMPENSATE FOR THE WEAR, SO THE VOLUMETRIC EFFICIENCY IS HIGH • DOUBLE TAPER ROLLER BEARINGS PERMIT HIGH RADIAL LOADS. THE MOTORS CAN BE USED ON HEAVIER VEHICLES IN TRACTION DRIVE APPLICATIONS

MAIN SPECIFICATIONS

DISPLACEMENT IN³ (CM³) / REV.

19.2 (315)

24.3 (400)

30.4 (500)

38.4 (630)

48.7 (800)

60.9 (1000)

CONT.

42

53

53

53

53

53

FLOW (GPM)

INT.

53

63

63

63

63

63

CONT.

510

500

400

320

250

200

SPEED (RPM)

INT.

630

600

480

380

300

240

CONT.

3045

3045

3045

3045

3045

3045

PRESSURE (PSI)

INT.

3625

3625

3625

3625

3625

3625

CONT.

7213

10502

13039

14869

15824

17813

TORQUE (LB-IN)

INT.

9892

12659

15611

17371

17689

20155

LENGHT (IN)

L

8.38

8.66

8.98

9.44

10.02

10.65

NOTES 1. CONTINUOUS DATA: THE MAX. VALUE OF OPERATING MOTOR CONTINUOUSLY. 2. INTERMITTENT DATA: THE MAX. VALUE OF OPERATING MOTOR IN 6 SECONDS PER MINUTE.

3. A SIMULTANEOUS MAX. RPM AND MAX. PRESSURE IS NOT RECOMMENDED. 4. THE CONVERSION FACTORS IS ON THE PAGE 4, CONSULT IT PLEASE. 5. OPTIMUM OPERATING SITUATION SHOULD BE AT THE 1/3~2/3 OF THE CONTINUOUS OPERATING SITUATION.

MODEL CODES

FLANGE 60.9 (1000) SAE-C 4 BOLT 2 1/4” STRAIGHT 381-0021 381-0022 381-0023 381-0024 381-0025 381-0026 OTHER MOUNTINGS AND SHAFTS AVAILABLE SHAFT 19.2 (315) 24.3 (400) 30.4 (500) 38.4 (630) 48.7 (800)

DIMENSIONS

Ø 6.38

4 - Ø0.67

0.94

0.53

0.94

0.38

2.15

0.5

SAE-06

3/8-16

1.77

2 - SAE-16

3.19

L

3.82

PAGE 50

Made with FlippingBook flipbook maker