WELDED CYLINDERS - BUSHING TYPE
OUTSIDE DIAMETER
ROD DIAMETER A B
PORT SIZE*
MODEL CODE CYLINDER BORE
C
D
E
F
G H
BU15XX-S BU20XX-S BU25XX-S BU30XX-S BU35XX-S BU40XX-S BU50XX-S
1.50 2.00 2.50 3.00 3.50 4.00 5.00
1.875 2.375 2.875
1.00 1.25 1.50 1.50 1.75 2.00 2.50
8.00 1.25 0.76 2.62 2.25 2.00 1.06 1.87 SAE-04 8.00 1.50 1.01 2.25 2.75 2.25 1.00 2.06 SAE-06 8.00 1.50 1.01 2.25 3.25 2.25 0.81 2.18 SAE-08 8.00 1.50 1.01 2.25 3.75 2.25 0.81 2.18 SAE-08 10.00 2.00 1.26 4.00 4.25 2.25 0.81 2.18 SAE-08 10.00 2.25 1.51 3.75 4.75 2.50 0.81 2.18 SAE-08
3.50 4.00 4.50 5.50
12.00 3.00 1.76**
3.50 5.75 3.25 1.25 2.75 SAE-12
* NPT PORTS ARE ALSO AVAILABLE ** PIN SIZE WITH INSERT, 2" WHEN REMOVED MAXIMUM RETRACTED WORKING PRESSURE : 3000 PSI MAXIMUM EXTENDED WORKING PRESSURE : SEE TABLE RETRACTED AND STROKE TOLERANCE ± 1/8"
DIMENSIONS
ROD DIAMETER PIN SIZE PORT SIZE*
COLUMN LOADS (LBS)
PRESSURE (PSI)
WEIGHT (LBS)
MODEL CODE BORE X STROKE
RETRACTED EXTENDED
BU1504-S BU1506-S BU1508-S
1.5” X 4” 1.5” X 6” 1.5” X 8”
12” 14” 16” 18” 20” 22” 24” 26” 28” 32” 12” 14” 16” 18” 20” 22” 24” 26” 28” 32” 36” 38” 40” 44” 48” 56”
16” 20” 24” 28” 32” 36” 40” 44” 48” 56” 16” 20” 24” 28” 32” 36” 40” 44” 48” 56” 64” 68” 72” 80” 88”
5300 5300 5300 5300 5300 5300 5300 4800 4000 3000 9400 9400 9400 9400 9400 9400 9400 9400 9400 7300 5600 4900 4400 3500 2900 2100
3000 3000 3000 3000 3000 3000 3000 2700 2300 1700 3000 3000 3000 3000 3000 3000 3000 3000 3000 2300 1700 1500 1400 1100
8 9
10 12 13 14 15 17 18 20 12 13 15 17 19 20 22 24 25 29 32 34 35 39 42 49
BU1510-S 1.5” X 10” BU1512-S 1.5” X 12” BU1514-S 1.5” X 14” BU1516-S 1.5” X 16” BU1518-S 1.5” X 18” BU1520-S 1.5” X 20” BU1524-S 1.5” X 24”
1”
3/4”
SAE-04
BU2004-S BU2006-S BU2008-S BU2010-S BU2012-S BU2014-S BU2016-S BU2018-S BU2020-S BU2024-S BU2028-S BU2030-S BU2032-S BU2036-S BU2040-S BU2048-S
2” X 4” 2” X 6” 2” X 8” 2” X 10” 2” X 12” 2” X 14” 2” X 16” 2” X 18” 2” X 20” 2” X 24” 2” X 28” 2” X 30” 2” X 32” 2” X 36” 2” X 40” 2” X 48”
1-1/4”
1”
SAE-06
900 600
104”
COLUMN LOAD IS THE MAXIMUM PUSHING LOAD SUGGESTED USING A MINIMUM SAFETY FACTOR OF 2 AND BASED ON A PIN TO PIN MOUNTING CALCULATION.
HYDRO CUSTOM IS NOT RESPONSIBLE FOR INCORRECT RESULTS OBTAINED WITH FIGURES IN THIS DOCUMENT. INFORMATION IS FOR REFERENCE ONLY. NO OTHER CONDITIONS ARE EXPRESSED OR IMPLIED.
PAGE 6
Made with FlippingBook flipbook maker