PISTON PUMPS
A10V VARIABLE DISPLACEMENT PUMPS
TECHNICAL SPECIFICATIONS • SWASHPLATE AXIAL PISTON PUMP • GOOD SUCTION CHARACTERISTICS • COMPACT, LIGHTWEIGHT, LOW NOISE • LONG SERVICE LIFE, HIGH PRECISION BEARINGS • AXIAL AND RADIAL LOAD CAPACITY
MAXIMUM OPERATING PRESSURE NOMINAL: 4060 PSI (280 BAR) INTERMITTENT: 4560 PSI (315 BAR) PEAK: 5075 PSI (350 BAR) MAXIMUM CASE DRAIN PRESSURE: 29 PSI (2 BAR) SUCCION PRESSURE RANGE: 11.6 - 435 PSI (0.8 - 30 BAR) ABSOLUTE FEATURES - PRESSURE COMPENSATOR WITH LOAD SENSE CONTROL (DFR) - VOLUME STOP - CLOCKWISE ROTATION - SIDE PORTS WITH CODE 61 FLANGES - BUNA SEALS
ALSO AVAILABLE - MANY CONTROLS SUCH AS: REMOTE COMPENSATOR (DRG) AND COMPENSATOR WITH HORSEPOWER LIMITER (DFLR) - COUNTERCLOCKWISE ROTATION - END PORTS WITH CODE 61 OR 62 FLANGES - VITON SEALS - OTHER MOUNTING FLANGES AND SHAFTS
DISPLACEMENT IN ³ (CM ³ ) / REV.
GPM @ 1800 RPM
MOUNTING FLANGE
PORTS CODE FLANGE 61
DRAIN PORT
MODEL CODE
MAX RPM
SHAFT
A10VS018-DFR-31-R-P-K-C62N00
3/4” KEY
SAE-A 2 BOLT
INLET: 1” OUTLET: 3/4”
1.1 (18)
8.5
3300
SAE-06
A10VS018-DFR-31-R-P-S-C62N00
3/4 SPLINE
A10VS028-DFR-31-R-P-K-C62N00
7/8” KEY
INLET: 1 1/4” OUTLET: 1”
1.71 (28)
13
3000
SAE-08
A10VS028-DFR-31-R-P-S-C62N00
7/8” SPLINE
SAE-B 2 BOLT
A10VS045-DFR-31-R-P-K-C62N00
1” KEY
INLET: 1 1/2” OUTLET: 1”
2.75 (45)
21
2600
A10VS045-DFR-31-R-P-S-C62N00
1” SPLINE
SAE-10
A10VS071-DFR-31-R-P-K-C62N00
1 1/4” KEY
INLET: 2” OUTLET: 1”
4.33 (71)
33.5
2200
A10VS071-DFR-31-R-P-S-C62N00
1 1/4” SPLINE
SAE-C 2 BOLT
A10VS0100-DFR-31-R-P-K-C62N00
1 1/2” KEY INLET: 2 1/2”
6.10 (100)
47
2000
A10VS0100-DFR-31-R-P-S-C62N00
1 1/2” SPLINE OUTLET: 1 1/4”
SAE-12
A10VS0140-DFR-31-R-P-K-C62N00
1 3/4” KEY INLET: 2 1/2”
SAE-D 4 BOLT
8.54 (140)
66.5
1800
A10VS0140-DFR-31-R-P-S-C62N00
1 3/4” SPLINE OUTLET: 1 1/4”
PAGE 77
Made with FlippingBook flipbook maker