How to wash:
- Machine wash with cold water only. - Turn the garment inside out. - Color-safe detergent ( No Bleach ) - Remove quickly from the wash, and put into the tumble dryer on low heat. - Colours can bleed if the shirt stays wet for too long. - If you get bleeding, wash the shirt again immediately - Dry on low setting.
Storing instructions: After opening, store unused sheets in a resealable poly bag in a flat, cool, and dry area.
Vinyl Cutting:
- If you want to cut out your design with a vinyl cutter instead of scissors, then you can do a
Print and Cut from your Silhouette Cameo software to your cameo machine. Use the
registration marks function in the software.
- Make sure you don't cut through the backing of the paper.
- The Following cut settings can be used as a guideline
Blade: 1; Speed:10 and Thickness: 3
- Load the JetTrans S printed sheet without the cutting mat.
- After cutting remove the unwanted areas around your print. Press on the t-shirt/fabric as
per the settings above.
Warning: If you are using a sublimation printer to print your transfers, press the transfers immediately after printing. Allowing the transfers to sit for more than a few hours without transferring them, may result in a colour shift.
Made with FlippingBook - professional solution for displaying marketing and sales documents online