ROTARY GUTTER CLEANING: REMOVE + RINSE
1
CLEANING WITH THE ROTARY PADDLE BRUSH The ROTARY PADDLE BRUSH is great for removing dry, loose leaves. While spinning with your cordless drill, the paddles lift debris up and out of the gutter. NOTE: ALWAYS SPIN THE PADDLE BRUSH “AWAY” FROM THE ROOF • When working from “Right to Left” spin your cordless drill in a counter clockwise direction // drill in reverse. • When working from “Left to Right” spin your cordless drill in a clockwise direction // drill forward. HANDLING GUTTER SUPPORTS Once you reach a gutter support, clean completely under the support until the curved tube makes contact with the gutter support. Then pull the ROTARY PADDLE BRUSH back slightly and lift up and over gutter support. Lower the paddle brush back into the gutter and continue cleaning.
2
3
DEBRIS CLEAN-UP Collect debris on a tarp and dispose. It’s best to clean the ground area before rinsing the gutter clean with water.
4
RINSING THE GUTTER Remove the CORDLESS DRILL and DRILL ADAPTER from the ROTARY DRIVE EXTENSION POLE and attach the HOSE ADAPTER WATER CONTROL VALVE and garden hose. Attach the GUTTER BRUSH WITH WATER JET NOZZLE tool. Turn on the water and use the GUTTER BRUSH WITH WATER JET NOZZLE to rinse the inside and outside of the gutter clean. PRO TIPS • On windy days, work in the same direction as the wind. This will prevent leaves from blowing toward you as you work. • Angle the rotary gear assembly slightly away from you while rotary cleaning to help prevent debris from falling toward you.
1
ROTARY PADDLE BRUSH
GUTTERSWEEP CLEANING WITH THE ROTARY PADDLE BRUSH
2 QTY ROTARY DRIVE EXTENSION POLES
ADDITIONAL ROTARY DRIVE EXTENSION POLES SOLD SEPARATELY
3
GutterSweep™ Operator Manual
Made with FlippingBook - professional solution for displaying marketing and sales documents online