Electric Ball Valves
2700 SERIES ELECTRIC BALL VALVES The 2700 Series of Ball Valves can be used as either a 2-way or 3-way valve depending on the application. Plug one outlet for 2-way applications or remove the plug for 3-way applications. Wetted parts are made of glass filled nylon and 303 stainless steel. The motor is totally enclosed with a sealed connector and is protected by a self-resetting fuse. These valves are equipped with a Teflon shaft and ball seals. Valves come standard with 1” pipe plug. Open and close time is .8 seconds. MV.2701 Electric Ball Valve Single Electric Ball Valve with 1” NPT threaded outlets and a 1” NPT threaded bottom inlet. Comes as a 2-way assembly that may be converted to a 3-way by customer.
MV.2702 Flanged Electric Ball Valves The flanged electric ball manifold valves come with 1-1/2” NPT threaded flanged manifold and 3/4” NPT threaded outlets. Flanges are grooved for gasket configuration and easy plumbing. Valves come as 2-way and may be converted to a 3-way by the customer. Flanged manifold valves can be assembled into banks of up to 5 valves.
EQUIPMENT STANDARDS: - 1-1/2” NPT Threaded Flanged Bypass - 3/4” NPT Threaded Flanged Outlets - Open and close time is .8 seconds
Maximum Pressure: 200 PSI (1378 kPa) GPM: 0-30 (110 LPM) Pressure Drop: 5 PSI at 30 GPM Current Draw: 2.5 AMPs
EQUIPMENT STANDARDS: - 1” NPT Bottom Inlet - 1” NPT Side Outlets - Single Electric Ball Valve - Open and close time is .8 seconds
Maximum Pressure: 200 PSI (1378 kPa) GPM: 0-30 (110 LPM) Pressure Drop: 5 PSI at 30 GPM Current Draw: 2.5 AMPs
MV.2701
MV.2702.1F
MV.2702.1F Single Flanged Electric Ball Valve CONFIGURATIONS: MV.2702.4F Quadruple Flanged Electric Ball Valve Bank
ACCESSORIES:
MV.2702.2F Double Flanged Electric Ball Valve Bank MV.2702.5F Quintuple Flanged Electric Ball Valve Bank
MV.2702.3F Triple Flanged Electric Ball Valve Bank
KT.2532 Repair Kit for MV.2701, MV.2702, and MV.2702F Valves
MV.2702 Stackable Electric Ball Manifold Valves
These stackable electric ball manifold valves come with either 1” NPT or 1-1/2” NPT threaded end plates or a blank end plate on one end. Mounting holes can be found on the bottom of end plates. These valves come as a 2-way assembly that may be converted to a 3-way by the customer. Can be assembled in a bank of up to 5 valves.
ACCESSORIES: For both 2400 & 2700 Series Valves (For valves with bolted manifolds)
EQUIPMENT STANDARDS: - 1” NPT end plates - Open and close time is .8 seconds ADDITIONAL OPTIONS: - 1-1/2” NPT end plates - Optional blank plate
Maximum Pressure: 200 PSI (1378 kPa) GPM: 0-30 (110 LPM) Pressure Drop: 5 PSI at 30 GPM Current Draw: 2.5 AMPs
BKT.2452
BKT.2453
BKT.2454
BKT.2455
BKT.2456
BKT.2452 Mounting Bracket for Single Valve
BKT.2453 Mounting Bracket for Double Valve Bank
BKT.2454 Mounting Bracket for Triple Valve Bank
BKT.2455 Mounting Bracket for Quadruple Valve Bank
BKT.2456 Mounting Bracket for Quintuple Valve Bank
MV.2702.1
CONFIGURATIONS:
Valve mounting brackets are formed from 14 gauge stainless steel. Screws for mounting are included.
MV.2702.1 Single Electric Ball Valve
MV.2702.2 Double Electric Ball Valve
MV.2702.3 Triple Electric Ball Valve
MV.2702.4 Quadruple Electric Ball Valve
MV.2702.5 Quintuple Electric Ball Valve
24 | www.SprayerValves.com
ELECTRIC BALL VALVES | 25
Made with FlippingBook Online newsletter