Accessories
ELECTRIC PRESSURE REGULATORS TIR pressure regulators are close-tolerance butterfly type regulators. They are equipped with a precision high torque motor combined with a high strength body for heavy duty service. Wetted parts are made from glass filled nylon and stainless steel. Viton seals are standard. These are an excellent choice for use as a bypass regulator or throttling valve. Regulators turn at 1 RPM on a 12 Volt DC system and .5 RPM on a 6 Volt DC system.
CHEMICAL ISOLATORS Chemical Isolators keep dangerous chemicals from entering the tractor or truck cab to ensure operator safety. Made from glass filled nylon and filled with non-toxic antifreeze, the isolator dampens and protects your pressure gauge from corrosive chemicals. A large capacity assures accurate pressure readings up to a maximum pressure of 150 PSI (1034 kPa).
CONFIGURATIONS:
ISO.2350 Chemical Isolator with Mounting Bracket and 1/8’’ NPT Female threading without tube fittings
ISO.2391 Chemical Isolator with Mounting Bracket and 1/4’’ NPT Female threading without tube fittings
CONFIGURATIONS:
PR.1541A - 1” NPT Female Inlet and Outlet - 1” Orifice - Recommended for flow rates of
PR.1560A - 3/4” NPT Female Inlet and Outlet - 3/4” Orifice - Recommended for flow rates up to 50 GPM (189 LPM)
ACCESSORIES:
15 GPM (57 LPM) - 100 GPM (378 LPM)
PR.1541A
KT.2300 - Chemical Isolator Kit with Bracket and Fittings for both 1/8” and 1/4” Tubing
ISO.2350
SWITCH AND WIRE ASSEMBLY FOR PRESSURE REGULATORS SW.1625 Switch and wire assembly for use with PR.1541A or PR.1560A. Has a 2-way switch with 8-Ft battery cord and 8-Ft connector. Use with PR.1541A or PR.1560A.
PRESSURE ADAPTOR Used to connect the 1/8” gauge tubing from solenoid valves to the spray line. With the 2100C, 2500B, or 2502B valves, the adaptor is used on the inlet side of the valve. With the 1999A valve, the adaptor is screwed into the boom outlet.
SW.1625
CONFIGURATIONS: PL.2152 3/4” Plastic Adaptor ADPTR.2153 1-1/2” Plastic Adaptor
SWITCH AND WIRE ASSEMBLY FOR SOLENOID SHUTOFF VALVES SW.2114.WP
Switch and wire assembly for on-off control of a single solenoid shutoff valve. Comes with an 8-Ft battery power cord and 8-Ft wires with Weather Pack Connectors. Spade Terminal Connectors optional.
SW.2114.WP
PL.2152
38 | www.SprayerValves.com
ACCESSORIES | 39
Made with FlippingBook Online newsletter