ULTRA PAN CARRIER ® AND ULTRA CAMCART ® H-SERIES
Marine rail is designed for use during service, not transport.
MODEL
UPCH4002
UPCH8002
UPCH16002
Electrical Specifications REQUIRED VOLTAGE
200 – 230 VAC
200 – 230 VAC
200 – 230 VAC
1,2a
1,2a
2,3a
MAXIMUM AMP.
265w 50/60
265w 50/60
506w 50/60
WATTS HERTZ
Euro plug, CEE7
Euro plug, CEE7
CEE7/7 to C15RA
PLUG TYPE
2,7 m
2,7 m
2,7 m
POWER CORD LENGTH
Top Loaders
65˚– 74˚C
HOT HOLDING
3 x 2 1/2 in
2 x 4 in
1 x 6 in
1 x 8 in
1 hour
WARM UP TIME (from ambient to temperature)
Hot Holding When Unplugged 85˚C 82,8˚C
81,7˚C
80˚C
78,9˚C
3 minutes
RECOVERY TIME* (time to recover to temperature after door is held open for 30 seconds)
Front Loaders
Starting
1 hr.
2 hrs.
3 hrs.
4 hrs.
4 hours+
TRANSPORT TIME* (after reaching temperature, amount of time unit can be held passively/ unplugged until contents reach 65˚C.)
Temperature
*Based on test with 6 each, 15,24 cm deep H-pans with GripLids ® filled with approx 14,2 L of 87,7˚C water. (Temperatures are of the water not the air in the cart).
4 x 2 1/2 in
3 x 4 in
2 x 6 in
1 x 8 in & 1 x 2 1/2 in
Capacity Guide
Front Loaders
UPCH4002 UPCH8002 (x2) UPCH16002 (x4)
6 x 2 1/2 in 6 x 6,5 cm
4 x 10 cm
3 x 15 cm
2 x 20 cm
4 x4 in
3 x 6 in
2 x 8 in
Food Pan Portion Guide
GN 1⁄1 Food Pan DEPTH SERVING PORTIONS PER PAN (1 CUP)
20 cm
15 cm
10 cm
6,5 cm
80
60
40
30
1/9
1/6
1/4
1/3
1/2
1/2 long
full
Made with FlippingBook flipbook maker