TIRE AND WHEEL REPAIR 2017

TIRE & WHEEL REPAIR

23

DOUBLE FLARING TOOL SET

BRAKE SPRING TOOL

MAKES IT EASY TO REMOVE AND REPLACE SPRINGS THAT ARE SET OVER A POST

MAKES BOTH SINGLE AND DOUBLE SAE FLARES INCLUDES EVERYTHING NEEDED TO FLARE THIN WALL STEEL, ALUMINUM OR 0.040 WALL SOFT COPPER TUBING INCLUDES: 5 THREAD DIES AND ADAPTERS FOR FORMING DOUBLE FLARES ON THE FOLLOWING TUBING SIZES: 3/16”, 1/4”, 5/16”, 3/8”, 1/2” THIS SET IS NOT FOR USE ON STAINLESS STEEL TUBING

HEAT-TREATED END FITTING ENGAGES HOOK AND REMOVES IT FROM THE POST WHEN THE TOOL IS TURNED CLOCKWISE

• SHOE HORN DESIGN ON THE OTHER END MAKES IT EASY TO SLIP THE SPRING BACK OVER THE POST • LARGE HANDLE GIVES GOOD GRIP AND EASY OPERATION

• PACKAGED IN A DURABLE, OIL AND GREASE RESISTANT TRAY FOR STORAGE • FULL INSTRUCTIONS INCLUDED

LINE CODE PART NO. DESCRIPTION

CASE PK.

LIS

46750 BRAKE SPRING TOOL

1

LINE CODE PART NO. DESCRIPTION

CASE PK.

BRAKE SPRING WASHER TOOL

LIS

31310 DOUBLE FLARING TOOL SET

1

9MM BRAKE CALIPER HEX BIT

FITS BOTH LARGE AND SMALL WASHERS

• TROUBLESOME BRAKE SHOE RETAINING SPRING WASHERS CAN NOW BE EASILY REMOVED AND THEN REINSTALLED • WIDE “WINDOW” ALLOWS BETTER VISIBILITY TO ALIGN THE NAIL AND WASHER SLOT

FOR REMOVING AND INSTALLING 9mm HEX BRAKE CALIPER BOLTS ON LATE MODEL FORD SUV AND MERCEDES APPLICATION MAY ALSO WORK ON OTHER APPLICATIONS INCLUDING: FORD EXPEDITION ‘06 - ‘08, FORD ESCAPE ‘06, MERCEDES ML320 CDI, AND OTHER VEHICLES

LINE CODE PART NO. DESCRIPTION

CASE PK.

USE WITH 3/8” SQUARE DRIVE

LIS

47400 BRAKE SPRING WASHER TOOL

1

IMPORT CAR BRAKE CLIP TOOL

LINE CODE PART NO. DESCRIPTION

CASE PK.

LIS

33960 9MM BRAKE CALIPER HEX BIT

1

DESIGNED FOR IMPORT CARS WITH BRAKE SHOE HOLD-DOWN CLIPS

PARKING BRAKE CABLE REMOVER

• REMOVES AND INSTALLS THE BRAKE CLIP AND NAIL ON BRAKE SHOES IN SECONDS • SET TOOL HEAD IN THE BRAKE CLIP GROOVE AND PUSH THE TOOL TO DEPRESS BRAKE CLIP • TURN HANDLE 1/4 TURN TO DISENGAGE THE CLIP FROM NAIL AND REVERSE TO INSTALL

• ALLOWS TECHS TO REMOVES PARKING BRAKE CABLE BY COMPRESSING THE SPRING (SUPERSEDES 40800) • TOOL CAN BE USED WHEN CABLE IS STILL ATTACHED TO PARKING BRAKE ASSEMBLY • ENDS OF TOOL ARE ANGLED TO ALLOWS EASIER ACCESS, SLOTS ON EACH END ALLOW TOOL TO SLIP OVER CABLE INSTEAD OF FEEDING THE CABLE THROUGH THE END OF THE TOOL; ESPECIALLY USEFUL ON FORD F-SERIES, EXPEDITIONS, EXCURSIONS, ETC.

LINE CODE PART NO. DESCRIPTION

CASE PK.

LIS

48400

IMPORT CAR BRAKE CLIP TOOL

1

MINI TUBING CUTTER SMOOTH NYLON ACTION CUTS TUBING QUICKLY CAN BE USED IN TIGHT PLACES RIGHT ON THE CAR HANDLES SMALLEST TUBING TO 5/8” O.D. COMPLETELY NON-CORROSIVE FOR ALL TYPES OF METAL TUBING

LINE CODE PART NO. DESCRIPTION LIS

40750 PARKING BRAKE CABLE REMOVER

• •

MEDIUM FLEX-HONE FOR ROTORS • SPECIALLY DESIGNED TO PROVIDE THE IDEAL SURFACE FINISH FOR DISC BRAKE ROTORS AND FLYWHEELS

LINE CODE PART NO. DESCRIPTION

CASE PK.

UTILIIZES THE PATENTED FLEX-HONE® TECHNOLOGY TO PRODUCE THE IDEAL SURFACE FINSISH ON ON AUTOMOTIVE AND MOTORCYCLE DISC BRAKE ROTORS, AUTOMOTIVE FLY WHEELS AND CLUTCH PLATES MORE ROTORS PER HONE THAN ABRASIVE PADS LOWERS HARMONIC VIBRATIONS PRODUCES A NON-DIRECTIONAL PATTERN IDEAL FOR NEW AND RE-TURNED ROTORS AND FLYWHEELS

LIS

50000 MINI TUBING CUTTER

1

• BENDS 3/16” BRAKE LINES WITHOUT KINKING OR FLATTENING ESPECIALLY IN TIGHT SPOTS • BEND ALL TYPES OF 3/16” OD TUBING • UNIQUE HEAD DESIGN BENDS TUBING WITHOUT COLLAPSING THE TUBE • WON’T MARK TUBE SURFACE • THE HANDLES ARE MORE THAN 3-1/4” APART FOR PROPER LEVERAGE WHEN HANDLING EVEN STEEL TUBING 3/16” TUBING BENDER PLIERS

• • •

LINE CODE PART NO. DESCRIPTION MED

LINE CODE PART NO. DESCRIPTION

CASE PK.

Z120 MEDIUM FLEX-HONE FOR ROTORS

LIS

44150 3/16” TUBING BENDER PLIERS

1

Made with FlippingBook flipbook maker