TIRE AND WHEEL REPAIR 2017

TIRE & WHEEL REPAIR

42

SEAL PULLER

TIRE INFLATION CAGES • CONSTRUCTED WITH SAFETY IN MIND • ONLY THE HIGHEST QUALITY, 2 1/4” DIAMETER, HIGH-YIELD STEEL TUBING THAT HAS EXPANSION PROPERTIES TO ENSURE STRENGTH AND DURABILITY ARE USED • CAGES MEET OSHA REQUIREMENTS • ARCHED TUBE DESIGN IS ENGINEERED FOR MAXIMUM ENERGY DISPLACEMENT • ADD THE NO-MAR MESH OPTION FOR ULTIMATE SAFETY AND, TO IMPROVE EFFICIENCY, ADD THE BLOCKHEAD AUTO INFLATOR AND THE 210 CAGE ROLLERS.

• •

HEAD ADJUSTS TO 5 POSITIONS TWO HOOK SIZES EASILY REMOVE MOST OIL AND GREASE SEALS

WHERE CLEARANCE

IS A PROBLEM, REMOVE THE PIN TO REPOSTION THE HEAD

• THE ADJUSTABLE HEAD WORKS GREAT ON FRONT WHEEL DRIVE TRANSAXLES • ALSO WORKS ON FRONT CRANKSHAFT SEALS WITHOUT REMOVING THE RADIATOR

FOR OIL AND

GREASE SEALS • SIMPLY INSERT THE TIP OF THE TOOL BEHIND THE OIL OR

LINE CODE PART NO. DESCRIPTION BRA

GREASE SEAL, PRESS AND PULL • LEVERAGE WORKS FOR YOU • TWO SIZE TIPS REACH IN AND FIT NEARLY ALL SEAL APPLICATIONS

2240 TIRE INFLATION CAGES

HANDLE IS 12-1/2” LONG

LINE CODE PART NO. DESCRIPTION

CASE PK.

T.O.M.C.A.T. AIR ASSISTED CAMBER ADJ. TOOL • Works on many GM and Chrysler vehicles using two-bolt lower strut mounts; Inflatable air bladder fits between tire and strut for easy and controlled adjustment of camber settings. • Camber can be easily set with wheels on the ground. • Eliminates the need for special camber bolts.

LIS LIS

56650 ADJUSTABLE SEAL PULLER

1 1

56750 SEAL PULLER

• Includes: 2' air hose and bladder. , Low pressure pop-off valve to prevent overinflating, Air control valve for inflating and controlled deflating.

LINE CODE PART NO. DESCRIPTION MED JDI-TC614 T.O.M.C.A.T. AIR ASSISTED CAMBER ADJUSTMENT TOOL

UNIVERSAL LOCK OUT TOOL

LINE CODE

PART NO.

DESCRIPTION

LOC

80A

UNIVERSAL LOCK OUT TOOL

CV BOOT CLAMP PLIERS- FWD PRODUCT

INFLATABLE DENT REMOVER- 2 PC

FOR EAR- TYPE CLAMPS INCLUDING GM FWD OUTBOARD CV JOINTS

USES HAND PUMPED AIR PRESSURE TO PUSH DENTS OUT FROM THE INSIDE OF DOOR AND FENDER PANELS

DESIGNED FOR USE WITH TORQUE WRENCH, AS REQUIRED FOR STAINLESS STEEL BANDS

8” X 8” SQUARE IS FOR REMOVING DENTS IN TIGHT CORNERS OR ALONG WELDED SEAMS AND PANEL EDGES, AND 14’ X 8” OBLONG IS FOR LONGER MORE ACCESSIBLE LARGE DENTS

LINE CODE PART NO. DESCRIPTION

CASE PK.

LIS

30800 CV BOOT CLAMP PLIERS

1

SHAFT TYPE SEAL PULLER

• EACH BAG HAS 5 FEET OF AIR HOSE WITH OVERSIZED HANG PUMP BULB FOR LONG REACH • UNIVERSAL APPLICATIONS FOR ALL AUTOMOTIVE AND TRUCK DOOR AND BODY PANEL REPAIR • ELIMINATE HIGH POINTS CAUSED BY BODY SLIDE HAMMERS AND PICKS • PUSHES DENTS OUT TO THEIR NORMAL SHAPE ELIMINATING EXCESSIVE BONDO AND SANDING WORK

• REMOVES CAM SHAFT AND CRANK SHAFT SEALS WITHOUT DAMAGE TO THE SHAFT • ENGAGE THE ADJUSTABLE HOOK BEHIND THE SEAL • BRACE THE PUSH ROD AGAINST THE ENGINE HEAD AND PUSH THE HANDLE TO REMOVE THE SEAL • REMOVES THE SEAL WITHOUT DAMAGE TO THE SHAFT

LINE CODE

PART NO.

DESCRIPTION

LINE CODE PART NO. DESCRIPTION

CASE PK.

LIS

58430 SHAFT TYPE SEAL PULLER

1

LOC

800 INFLATABLE DENT REMOVER - 2 PIECES

Made with FlippingBook flipbook maker