This is an interactive catalogue showcasing all our printing solutions offered to you. Click the links and videos within the catalogue for more information.
FOREVER GmbH Robert-Bosch-Str. 43 68542 Heddesheim GERMANY
Phone: +49 (0) 62 03/930 20 - 0 E-mail: info@forever-ots.com Web: www.forever-ots.com
MULTI-TRANS PRO FOR HARD SURFACES
1-PAPER-SYSTEM
LASER PRINTER SETTINGS
OKI PRO7411/711WT & PRO9420/920WT • Mirror Image Mode • Media Type: UserType 1 • Multi-Purpose Tray • -2 White Toner Density • Paper-Feeding: Single-Sheet Feeding
FOREVER TRANSFERRIP • Mirror Image Mode
OKI PRO8432WT • Mirror Image Mode • Media Type: UserType 1 • Multi-Purpose Tray • +1 Color Paper • Paper-Feeding: Single-Sheet Feeding
WHITE TONER (CMYW)
• Media Type: UserType 1 • Automatic Tray Detection • White fill-up to: max. 180% • Paper-Feeding: Single-Sheet Feeding
OKI PRO9541WT • Mirror Image Mode
FOREVER TRANSFERRIP 5C • Mirror Image Mode
5-COLOR (5C) PRINTER (CMYKW)
• Media Type: FORVLDLT • Fill up White: max. 60% • Multi-Purpose Tray • -3 White Density • Paper-Feeding: Single-Sheet Feeding OKI C834 (C8X4-SERIES) • Mirror Image Mode • Media Type: UserType 8 • Multi-Purpose Tray
• Media Type: UserType 7 • Automatic Tray Detection • White fill-up to: max. 180% • Paper-Feeding: Single-Sheet Feeding
OTHER MODELS • Transparency/Heavy Paper 3 or similar paper type. • Contact your dealer to see if your CMYK laser printer is compatible.
CMYK
TRANSFER PROCESS 1. Pre-press your substrate/product with the recommended silicone pad and settings from the table below. 2. Place your design on your substrate/product (printed-side facing down) and if necessary, fix it with heat-resistant tape. 3. Press your transfer with the parameters indicated below and cover it with the recommeded silicone pad in the table below. 4. Peel the transfer paper by using the recommended settings from the table below. ATTENTION: At this point, the substrate is very hot. Take precautions while handling it. 5. If indicated in the table below, re-press your substrate/product with the same temperature as in step 3 for about 2-5 sec.
SETTINGS
SUBSTRATES/PRODUCTS
PRE-PRESS TIME + PRESS TIME
PEEL TEMP
SILICONE PAD
TEMP
PRESSURE
RE-PRESS
CMYK CMYW
135°C/275°F
20 + 30-35 sec.
Medium
-
Warm Hot
No
WOOD
135°C/275°F
2 + 5-10 sec.
Medium / High
-
Warm Hot
No
PAPER
135°C/275°F
2 + 15-20 sec.
Medium / High
-
Warm Hot
No
CARD
135°C/275°F
0 + 90 sec.
High
Speedy
Hot
Hot
No
ALUMINUM
135°C/275°F
45 + 45-60 sec.
High
Speedy
Warm Hot
No
GLASS
135°C/275°F
5 + 10-15 sec.
Medium
-
Warm Hot
No
LEATHER
135°C/275°F
30 + 35 sec.
Medium / High
Speedy
Warm Hot
Yes
CORK
160°C/320°F
0 + 60 sec.
High
For Mug Press Warm Hot
No
MUGS
135°C/275°F
45 + 45-60 sec.
High
Speedy
Warm Hot
No
MIRRORS
135°C/275°F
2 + 15-20 sec.
Medium / High
-
Warm Hot
No
COASTERS
135°C/275°F
2 + 5-10 sec.
Medium
-
Warm Hot
No
NAPKINS
110°C/230°F
0 + 180 sec.
Medium For Mug Press Warm Hot
No
PLASTIC (PP) TUMBLERS
BOOK COVERS (UNCOATED)
135°C/275°F
20 + 30-35 sec.
Medium
-
Warm Hot
No
TIPS & TRICKS • Remove any dust, coatings, chemicals and greases from substrate/product-surfaces, prior to the transfer. Metal and glass surfaces can be cleaned with alcohol. • Using the Silicone Pad helps distribute the heat evenly across the transfer. ATTENTION: The pressing parameters can vary when using a silicone pad. • If you excess particles have been transferred, you can easily remove them by rubbing it with a cloth.
QUESTIONS? Visit our website for further information: www. forever-ots .com • www. WhiteTonerTransfer .com
05/2022
Page 1 Page 2Made with FlippingBook - professional solution for displaying marketing and sales documents online