4
NB. The printed side of the A-foil must face the white glue side of the B-
paper so that the glue can stick to the toner of the print ✓ Smooth out any bubbles ✓ Place 5 sheets of plain copy paper on top of the A and B paper to stop
the glue from getting onto the heating plate and even heat distribution.
✓ Close the press and press at 160°C for 120 seconds ✓ When timer goes off, quickly remove the copy paper
NB. DO NOT REMOVE the A-foil and B-paper FROM THE RUBBER MAT as it
must be PEELED HOT
✓ Rub for 3 seconds and peel immediately by separating the B-paper from
the A-foil in a single smooth flat motion. Do not pull at an angle. ✓ FOR USE WITH THE HP GHOST PRINTER – PLEASE RUB HARD WITH
FOLDED CLOTH FOR 10 – 12 SECONDS AS THE TONER DIFFERS FROM
THE OKI PRINTER’S TONER AND TAKES LONGER TO GRAB THE GLUE
Made with FlippingBook - professional solution for displaying marketing and sales documents online