5 ✓ Cut all around your design in order to cut the glue residue that pushed
out around the edges off. If this is not done, it will leave a glue border
around your design.
• * Test the product first. Not all Leather/Pleather is the same.
• * These temperatures are for presses sold by JGE. Some experimentation will be required on your press that was not purchased from us.
• TRANSFER OF DESIGN TO YOUR GARMENT/SUBSTRATE
✓ The heat setting remains the same as above ✓ Pressure must be MEDIUM to HEAVY PRESSURE ✓ Time is 30 seconds ✓ Place your garment/substrate on your press and close the press to iron out any creases ✓ Place your design (A-foil with transferred glue) on your
garment/substrate
Made with FlippingBook - professional solution for displaying marketing and sales documents online