3
USING FOREVER MULTITRANS
1. For MULTITRANS FULL COLOUR - Print your artwork/design with your CMYK / CMYW laser printer 2. For MULTITRANS GOLD/SILVER - Print your artwork/design with your CMYK / CMYW laser printer in SOLID BLACK or SOLID WHITE (for the GHOST). 3. Remember to MIRROR the image. 4. Cut your print smaller than your product and fix to your product with heat tape
NB: DO NOT STICK HEAT TAPE OVER YOUR PRINT AS IT WILL NOT ALLOW ENOUGH HEAT TO GO THROUGH and your print will not transfer in that spot.
Have your silicone pad and multi-meter ready as you will need it to press some products
TRANSFER INSTRUCTIONS TRANSFER TO GLASSES/MASON JARS
Preheat your mug press to 150°C / 302°F with an unprinted mug in the element Set the timer to 150 seconds For GHOST PRINTERS use 140°C / 285°F for 300 seconds If using a MASON JAR – TAKE THE LID OFF. Place glass into the mug press with the base of the glass outside the element Use tight pressure (not so tight that you break the glass) Close press and start timer When timer goes off, remove the glass with a cloth and place somewhere to cool down for about 2 minutes DO NOT remove the Multitrans paper from the glass Place in a bucket with luke warm water until completely cool Take the glass out of the water Slowly and evenly peel the paper off the glass Bake in the oven for 20 minutes at 180°C
Made with FlippingBook - professional solution for displaying marketing and sales documents online