TFH Special Needs Toys
Circles Acrylic Mirror Set: Instructions
1. Store in a cool, dry place prior to installation.
2. Remove acrylic circles from packaging.
3. There is a protective clear film on the mirrored side of the acrylic, remove the clear
film and wipe off the mirror with a wet micro-fiber towel.
4. Flip over the circle to the adhesive side, there is a white paper release liner and a
clear adhesive liner.
5. Using a razor or knife, gently score the white paper release liner without cutting into
the clear adhesive liner. This only needs to be a < 1” score on the edge of the circle.
*See picture below*
6. Using the tab you created, gently remove the white paper liner. Do not remove the
clear adhesive liner.
7. Paste circles on a smooth dust-free surface.
8. Press around all edges of the mirror with two fingers.
9. Using your full hand, hold with pressure on entire surface for 30 seconds.
10. Remove protective clear film from mirrored side.
11. This is an aggressive adhesive, make sure circles are in the correct position before
adhering to the surface of your choosing.
12. Cleaning – 50:50 Vinegar/Water solution with microfiber cloth.
Page 1Made with FlippingBook - professional solution for displaying marketing and sales documents online