LAVABOS BAJOCUBIERTA
STUDIO™ CARRÉ UNDERCOUNTER SINK VITREOUS CHINA STUDIO™ CARRÉ UNDERCOUNTER SINK VITREOUS CHINA
BARRIER FREE
STUDIO™ CARRÉ UNDERCOUNTER SINK BARRIER FREE STUDIO™ CARRÉ UNDERCOUNTER SINK • Square undercounter mount sink • Made from vitreous china • Customizable overflow position • Supplied with mounting kit (7301442-0070A) and template • Square undercounter mount sink • Made from vitreous china • Customizable overflow position • Supplied with mounting kit (7301442-0070A) and template
❏ 0426.000 ❏ 0426.000
405 x 405mm (16" x 16") 405 x 405mm (16" x 16")
0426000.020* Blanco Lavabo de bajocubierta Studio Carré
Bowl size: 344mm (13-1/2") wide 344mm (13-1/2") front to back 121mm (4-3/4") deep Bowl size: 344mm (13-1/2") wide 344mm (13-1/2") front to back 121mm (4-3/4") deep
FINISHED WALL OR BACKSPLASH
102mm ( ø -1/4")
32mm (4")
FINISHED WALL OR BACKSPLASH
102mm ( ø -1/4")
32mm (4")
DETAIL OF MOUNTING CLIP (KIT No. 7301442-0070A) DETAIL OF MOUNTING CLIP (KIT No. 7301442-0070A)
51mm (2) MIN.
Compliance Certifications - Meets or Exceeds the Following Specifications: • ASME A112.19.2 / CSA B45.1 Compliance Certifications - Meets or Exceeds the Following Specifications: • ASME A112.19.2 / CSA B45.1
51mm (2) MIN.
65mm (2-1/2")
65mm (2-1/2")
BRASS INSERT
19mm (3/4) MIN.
BRASS INSERT
19mm (3/4) MIN.
203mm (8")
LAVA
203mm (8")
EDGE OF COUNTERTOP CUTOUT
LAVA
EDGE OF COUNTERTOP CUTOUT
405mm (16")
CLIP MACH. SCREW
405mm (16")
CLIP MACH. SCREW
344mm (13-1/2")
344mm (13-1/2")
REFER TO INSTALLATION INSTRUCTIONS REFER TO INSTALLATION INSTRUCTIONS
344mm (13-1/2")
* To comply with ADA standards, overflow hole must face back. * To comply with ADA standards, overflow hole must face back.
344mm (13-1/2")
31mm (1-1/4)
405mm (16")
31mm (1-1/4)
405mm (16")
610mm (24")
610mm (24")
COUNTERTOP (BY OTHERS)
SEALING COMPOUND
14mm (1/2")
105mm (4-1/8")
To Be Specified: ❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Black ❏ Faucet*: ❏ Faucet Finish: ❏ Supplies: ❏ 1-1/4" Trap: To Be Specified: ❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Black ❏ Faucet*: ❏ Faucet Finish: ❏ Supplies: ❏ 1-1/4" Trap:
COUNTERTOP (BY OTHERS)
SEALING COMPOUND
14mm (1/2")
105mm (4-1/8")
172mm (6-3/4")
329mm (13")
172mm (6-3/4")
329mm (13")
279mm (11")
14mm (1/2")
279mm (11")
14mm (1/2")
273mm (10-3/4")
203mm (8")
273mm (10-3/4")
203mm (8")
202mm (8")
SUPPLIES AS REQ'D. ADA DRAIN OUTLET
202mm (8")
SUPPLIES AS REQ'D. ADA DRAIN OUTLET
686mm (27")
864mm (34")
1-1/4" O.D. WASTE
686mm (27")
864mm (34")
1-1/4" O.D. TAILPIECE 1-1/4" O.D. WASTE
38mm (1-1/2")
* See faucet section for additional models available * See faucet section for additional models available
38mm (1-1/2")
1-1/4" O.D. TAILPIECE
153mm (6")
864mm (34")
153mm (6")
864mm (34")
BARRIER FREE CLEARANCE
BARRIER FREE CLEARANCE
229mm (9") MIN.
229mm (9") MIN.
FINISHED FLOOR FINISHED FLOOR
• Cerámica porcelanizada de alto brillo • Sin perforaciones • Rebosadero frontal
NOTES: ▼ UNDERCOUNTER MOUNTING KIT SUPPLIED WITH SINK. FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. SEALING COMPOUND SUPPLIED BY OTHERS. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME A112.19.2 / CSA B45.1. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. NOTES: ▼ UNDERCOUNTER MOUNTING KIT SUPPLIED WITH SINK. FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. SEALING COMPOUND SUPPLIED BY OTHERS. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME A112.19.2 / CSA B45.1. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES - CHECK LOCAL CODES. Countertop 864mm (34") from finished floor. Lavatory installed 102mm (4") from front edge of countertop. Countertop thickness to be 25mm (1") maximum. Countertop 864mm (34") from finished floor. Lavatory installed 102mm (4") from front edge of countertop. Countertop thickness to be 25mm (1") maximum. MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
*Hasta agotar existencias
35
J72
J72
Revised 7/09
© 2010 AS America Inc.
Made with FlippingBook Digital Proposal Creator