Purever Sustainability Report 2025

Employee commuting emissions were calculated using employee survey data on commuting patterns, including distance travelled, transport mode and commuting frequency. Where survey data was unavailable, emission factors from comparable Group entities were used as proxies. Employees with company cars were excluded to avoid double counting with Scope 1 emissions. Where actual consumption data for leased assets was unavailable, emissions were estimated using asset area or equipment-specific usage assumptions. Location-based electricity emission factors were applied when supplier information was not available. For leased equipment, including electric lifting equipment and diesel-powered vehicles, consumption was estimated based on assumed operating hours, charging frequency and fuel consumption rates. Emissions from downstream transportation and distribution were calculated using available transportation data and, where necessary, estimated using spend-based emission factors. Assumptions were applied when transport mode, distance or shipment allocation data were unavailable, including for multimodal shipments and aggregated transportation records. End-of-life emissions for sold products were calculated using available material and disposal data, applying product-specific EPDs where available. Where information was incomplete, conservative assumptions, proxy emission factors and weight estimates were used. Throughout the footprint calculation, intra-group transactions were excluded to avoid double counting.

Upstream Transportation and Distribution emissions were calculated considering only internal transportation at the upstream stage to avoid double counting. Where the transportation mode was unknown, road transport was assumed. For multimodal shipments, each transport segment was estimated separately. Where transportation data was unavailable, emissions were estimated using a spend-based approach, generally assuming that 5% of the value of purchased goods related to transportation costs. Entity-specific assumptions and available transport data were applied where more detailed information was available. Products covered by Environmental Product Declarations (EPDs) used transport-related emissions from the corresponding EPD modules. Waste emissions were calculated using waste quantities and treatment-specific emission factors. Where treatment routes were unknown or could not be determined, conservative assumptions were applied. For entities lacking physical waste data, waste generation was estimated using employee-based proxies. Additional assumptions were applied where data limitations existed, including the conversion of wastewater quantities and the selection of appropriate emission factors for industrial waste streams with unspecified treatment methods. Business travel emissions were calculated primarily using activity data and, where unavailable, using spend- based emission factors. Several assumptions were applied to address data gaps, including the estimation of travel distances, transport modes, round trips and accommodation-related emissions.

Scope 3

The reported Scope 3 categories were determined based on an applicability assessment conducted for each company within Purever. This assessment considered the nature of each entity’s activities and enabled the identification of the emission sources to be included in the inventory, with only those not applicable to the characteristics of each entity being excluded. GHG emissions for purchased goods and services were calculated using a hierarchy of data sources. Product- specific emission factors from Environmental Product Declarations (EPDs) were applied where detailed product information was available. Where only material weight data was available, generic material emission factors were used. For purchases lacking physical data, spend-based emission factors were applied. Fuel- and Energy-Related Activities (Not Included in Scope 1 or Scope 2), emissions were calculated by applying well-to-tank (WTT) emission factors to the fuel consumption reported under Scope 1. Where only distance travelled data was available, fuel consumption was estimated using an average fuel efficiency of 6 litres per 100 kilometres. Transmission and distribution (T&D) losses were calculated using country-specific loss factors, and the associated upstream and combustion emissions were estimated using the corresponding emission factors.

154

PUREVER SUSTAINABILITY REPORT 2025

Made with FlippingBook - professional solution for displaying marketing and sales documents online