Before using the App
Antes de utilizar la aplicación Univet Connect Conecte el LED a la unidad de control (Fig.01), insertando la clavija situada en el extremo del cable del LED en el orificio lateral correspondiente (el mismo orificio que se ha utilizado para la carga). Una vez conectado el LED a la unidad de control, pulse y mantenga pulsado el botón ON/OFF durante 3 segundos para encender Lámpada (Fig.02). Para obtener más información sobre EOS Next, consulte la guía rápida incluida en el paquete.
Before using Univet Connect App
Prima di utilizzare l’App Univet Connect Collegare il LED all’unità di controllo (Fig.01) inserendo la presa jack posta all’estremità del cavo del LED nell’apposito foro laterale (lo stesso foro utilizzato per la ricarica). Una volta collegato il LED all’unità di controllo, tenere premuto il tasto ON/OFF per 3 secondi per accendere l’illuminatore (Fig.02). Per ulteriori informazioni su EOS Next consultare la Quick Guide inclusa nella confezione.
Bevor Sie die Univet Connect App verwenden Verbinden Sie die LED mit dem Steuergerät (Abb. 01), indem Sie die Klinkenbuchse am Ende des LED-Kabels in die dafür vorgesehene Buchse an der Seite einstecken (dieselbe Buchse, die auch zum Laden verwendet wird). Sobald die LED mit dem Steuergerät verbunden ist, drücken Sie die Taste ON/ OFF 3 Sekunden lang, um die Lampe einzuschalten (Abb. 02). Weitere Informationen zum EOS Next finden Sie in der Kurzanleitung, die der Verpackung beiliegt.
Avant d’utiliser l’application Univet Connect Brancher la LED à l’unité de contrôle (Fig.01) en insérant la fiche jack à l’extrémité du câble de la LED dans le trou latéral correspondant (le même que celui utilisé pour la recharge). Une fois la LED raccordée à l’unité de contrôle, appuyer et maintenir le bouton ON/OFF enfoncé pendant 3 secondes pour allumer l’éclairage (Fig.02). Pour plus d’informations sur EOS Next, consulter le Guide rapide présent dans l’emballage.
Connect the LED headlight to the control unit (Fig.01) by inserting the jack plug at the end of the LED cable into the appropriate side port (the same port used for recharging). Once the LED headlight is connected to the control unit, press and hold the ON/OFF button for 3 seconds to switch on the headlight (Fig.02). For further information on EOS Next, please refer to the Quick Guide supplied with the device.
3”
01.
02.
Activate Bluetooth on your Smartphone
Attivare il Bluetooth del proprio smartphone
Aktivieren von Bluetooth auf Ihrem Smartphone
Active el Bluetooth de su smartphone
Activer le Bluetooth de votre smartphone
iOS
ANDROID
univetloupes.com/eos-next | 3
Made with FlippingBook Ebook Creator