6.16.2 TONR
Input/output Operand
Data type
Constant(T0 — T255)
Txxx
word
IN
Enable bit
Boolean
PT
VW, IW, QW, MW, SW, SMW, LW, AIW, T, C, AC,constant, *VD, *LD, *AC Integer
TONR: When the value of the input “ IN ” is equal to 1,
timer starts time.Timer current value of Txxx is the current
time (a multiple of the time base).When the current value
of the timer is equal to the preset time (PT), the value of
the timer bit is 1.When the value of the input “ IN ” is equal
to 0, If the current value of the timer is less than the
preset value , timer current value is retained.Otherwise, the current value of the
timer is cleared.
Notes :
You can use TONR to accumulate multiple time intervals.
You can use the "recovery" (R) instruction to recover any timer.
You can only use the "recovery" instruction to recovery the TONR timer.
Example:
200
Made with FlippingBook - Online magazine maker