Confirm & Reset: After writing the configuration, click this button to complete the configuration and the PLC will restart. After the parameters are configured, it is best to test whether there is successful access to the network. The method is to run CMD.exe (on PC): ping 192.168.0.172
(3) Software reads/writes programs over the network:
The PLC in XLadder is used as the server by default, so the IP and Port of the PLC need to be
filled in the above figure.
After filling in, click the ‘OK’ button.
10.11 Modbus block (New block for Ethernet series PLC)
269
Made with FlippingBook - Online magazine maker