xLadder user manual-V2.0.0.6

from that pre - set in the “filename” in the Mini SD card inserted in PLC.

If this box has been ticked, the file content will show the time when the data starts to be recorded.

4. Separator Such separator shall be required while more than one analogue values would be stored and displayed for easier observation and convenient analysis.

5. File Size Sets the size of the file to be stored.

6. After memory Full Two options can be selected after the memory is full (it means the relative file has reached its pre - configured size), one is to over - write and the other is to stop recording.

7. Register params This section is for register’s parameters setting. The register includes the following choices:

8. Record Index

285

Made with FlippingBook - Online magazine maker