xLadder user manual-V2.0.0.6

5.1.4 PLC

RUN:Make RUN in PLC mode, running the program in PLC, if you use the software to

open RUN mode, you need to ensure the normal communication between software and PLC.

Stop : Make STOP in PLC mode, to stop the program in the PLC. If you use the software

to make STOP into the PLC mode, you need to ensure the normal communication between

software and PLC.

Compile:Compile the program of the current page.

Compile all:Compile all project components (program block, data block and system

block).

Clear : Clear all the data in the PLC, only offline can clear the data from the PLC.

Information : The information view of PLC, we can only see in the connection state.

Read PLC date/time:In the connection mode, read the PLC internal date time.

Write PC time to PLC : In the connection mode, the PC time is written to the PLC.

Type : Can choose the type of PLC.

MODBUS address query : The corresponding MODBUS address of the variable.

34

Made with FlippingBook - Online magazine maker