xLadder user manual-V2.0.0.6

5.3.1 Project

You can choose the type of PLC,When PLC type is determined, the PLC parameter will

appear below.

5.3.2 Data block

Data blocks contain DAT-0 and DAT-1, you can right-click to insert new data blocks

for programmers to use .The contents of the data block are as follows:

In the data block, you can set the address, data type, data value, and annotation .The

contents of the data blocks are written to PLC after a permanent save, unless a new

program is written in PLC.The content in the block of data is written to the PLC

and it will be permanently preserved, unless a new program is written in PLC.

40

Made with FlippingBook - Online magazine maker