xLadder user manual-V2.0.0.6

5.5.3 Network rules for series and parallel in LAD

Rules for placing contacts

Each network must begin with a contact.

The network cannot be terminated by contact.

Rules for placing coils

The network can not start with the coil ; The coil is used to terminate the logical

network.A network may have a number of coils, and the coils are located on a

parallel branch of the network.Could not be connected in series with more than one

coil in the network

Rules for placing blocks

If the block has ENO, the enable bit can be extended to the out of block;This means

that you can place more instructions behind the block.In the network, you can

connect in series with a number of boxes with ENO.If there is no ENO in the box, no

instruction can be placed on the following.

Network size limit

Cell is the area which is placed instruction.In the network, a single network can

extend 32 cells Vertically or 32 cells horizontally.

5.5.4 How to input commands in LAD

Line

You can use horizontal and vertical lines to connect elements to finish the network.

Double click the instruction tree

1.Place the cursor in the position you want to edit in the program editor

window.Click the mouse, there will be a selection box.

2.Select the required instruction, double click it.

58

Made with FlippingBook - Online magazine maker