5.5.10 How to save the project
You can use the "save" button on the toolbar to save your project, or use the
shortcut key CTRL+S to save your project.
"Save" allows you to save all changes quickly in your project.
“Save as” allows you to change the name of the current project and the location of
the directory .
5.6 How to set up a communication and download program
5.6.1 Communication settings
How to build a communication between the personal computer and the PLC in the
Xladder. It depends on the hardware that you installed.Use the communication cable
to connect PLC and the computer, set up the correct communication parameters in
the Xladder and then PLC and computer can communicate.
You can set up the communication or edit the communication settings at any time.
Steps to establish a communication:
1. Use the communication cable to connect PLC and the computer.
Default parameters:
Station Number:0
Port:Select the correct port
Baud rate:9600 bps
Check:EVEN
Stop bit: 1 bit
65
Made with FlippingBook - Online magazine maker