3. When the program is downloaded successfully, the interface is as follows:
There are three options,you can chose one of them.
5. When you choose “yes” or “no”, you can click on the “connection”
to monitor
the program. When you choose “cancel”, PLC is stopped.You can click on the “run”
， then click on the “connection” to monitor the program.
button
6.If the type of PLC set in the software is not consistent with the PLC type of the
actual connection,the software will display a warning message.
7. You can double click on the project of the project manager to modify the PLC
model.
8.Click the “download” button to download the program again.
9.If the program downloads successfully, you can convert the PLC from the STOP
mode to the RUN mode to run the program.
5.6.3 How to correct compilation errors and download errors
The output window automatically displays program information and error messages
at any time when you compile a program or download a program.
The information usually includes the error of the network, the column and row
position and the error code and instructions.
68
Made with FlippingBook - Online magazine maker