Drills/Drivers
Drill Accessories
No drill systemcomes close to the versatility of the Festool design. In seconds, FastFix chucks seamlessly change a Keyless Chuck drill into a right-angle drill, then into an offset driver and into a depth-stop driver. And, with the Centrotec Chuck system, switching between bit holders and drill bits is fast and easy.
T 18 + C 18
TXS & CXS
INTERCHANGEABLE CHUCKS
Keyless Chuck Standard replacement chuck for the PDC Drill. Compatible with C and T Drills. Up to 1/2" capacity. Ratcheting sleeve for increased retention.
$78.00 769067
$78.00 769067
Keyless Chuck
$74.00 499949
$74.00 499949
FastFix Depth Stop Chuck Depth-stop for consistent, precise depth setting regardless of material. Integral clutch maintains depth independent of torque setting. Quick-out ring backs out screws without affecting depth setting. FastFix Eccentric Chuck Offset, Eccentric Chuck places bit flush to the side, allows drilling/ driving right into corners. Chuck rotates 360° with 16 presets. Quick- release collar will not mar adjoining surfaces. FastFix Angle Chuck Right-Angle Chuck for close quarters. 1/4" Hex drive with wire detent, also accepts Centrotec or Keyless Chuck. Chuck rotates 360,° with 16 presets. Angle Attachment Right-Angle Chuck for close quarters. 1/4" Hex drive with magnet accepts 1/4" driver tips. Also accepts Centrotec and FastFix Keyless Chuck. Centrotec Chuck Lightweight, compact quick-release chuck provides two points of contact for bits and accessories. Using Centrotec accessories, precision-milled sleeve acts like bushing, prevents wobble.
$140.00 493539
$130.00 490294
$130.00 490293
$105.00 497951
$40.00 492135
$40.00 492135
CENTROTEC ACCESSORIES
Hand Driver Expand the versatility of the entire Centrotec range of drill bits and drivers with this solution for all hand-driving tasks.
$24.00 200140
$24.00 200140
Centrotec Adapter Convert any non-Festool drill for use with the Centrotec System using this adapter which fits into a standard Keyless Chuck. Provides a simple way to make any drill compatible with the Centrotec system. Centrotec Chuck (492 135) sold separately.
$24.00 496450
$24.00 496450
Adapter Adapt any Centrotec-equipped drill for use with 1/4" sockets. Ball lock for positive connection and socket retention.
$24.00 495131
$24.00 495131
Adapter Adapt any Centrotec-equipped drill for use with 3/8" sockets. Ball lock for positive connection and socket retention.
$26.00 495133
$26.00 495133
136
2018
Made with FlippingBook - Online catalogs