Filament dryer for Creality 3D NS9220D
Filament dryer (dim.: 233 x 266 x 99 mm). When the filament is not used for long periods of time, it may become damp. Thanks to the dryer, it will be possible to maintain perfect storing conditions for the filament and keep it ready to use all the time. The box is dustproof and compatible with various filament spools (up to 1 kg) This dry box is controlled by a knob and the working time can be set to 2,4 or 8 hours. It is shown on digital display. Specification: • power supply: 100 V up to 240 V AC;
• power: 120 W; • material: plastic; • temperature range: 50°C (+/- 10°C)
3D PRINTER REPLACEMENT PARTS 3DPEN
3D Pen NS9217
3D pen filament NS9218
Replacement nozzle for Creality Sermoon V1 Pro NS9220B Interchangeable copper nozzle, with the diameter of 0,4 mm diameter, dedicated for 1.75 mm filament.
3D pen is used for manual 3D prints. Prints made by this device appear almost immediately in front of our eyes. The pen can be connected to a power bank via USB cable. Filaments with a diameter of 1,75 mm are compatible with this pen. • included in the set are: three metres of filament; • pad and power supply
Set of filaments with overall length of 100 meters. Mix of 20 colours – 5 meters of filament per each colour. • filament’s diameter: 1,75 mm
Adhesive magnetic bed for Creality Sermoon V1 Pro NS9220C Pad is covered with microporous coating which provides strong adhesion of 3D prints. Interchangeable magnetic pad for NS Digital - Creality Sermoon V1 Pro 3d printer. The pad is easy to clean, after cooling down, slightly bend the pad to safely remove any prints. • square printer pad; dim.: 185x 185 mm
education
736
Made with FlippingBook Proposal Creator