RTT’s industrial exhaust chambers are designed to efficiently remove harmful vapors and particulate. With a wide range of design configurations, our exhaust chambers can accommodate the majority of production requirements, including sanding applications.
EXHAUST CHAMBERS
RTT ' s industrial exhaust chambers are designed to efficiently remove harmful vapors and particulate. With a wide range of design configurations, our exhaust chambers can accommodate the majority of production requirements including sanding applications. The dry arrestor filters trap the airborne overspray particles before the filtered air is discharged through the exhaust systems and into the atmosphere. Air replacement units and intake chambers can be added as well as reduced air flows for automatic spray operations. RTT's exhaust chambers are easy to install and simple to maintain. The quality and workmanship of RTT exhaust chambers allow us to offer a 5-year warranty when using high performance W-Series RP Arrestor exhaust filters manufactured by RTT . Features • Exhaust chambers are constructed from 18-gauge, prime quality galvanized steel. Structural steel is used to add strength and rigidity as necessary. Control panel is optional, fire control systems are to be supplied by others. • High efficiency W-Series RP Paint Arrestor blanket media ships with every chamber for extended life, increased depth loading and holding capacity. The blanket filters are secured in place with RTT FilterLoc technology which provides a tighter seal to the chamber eliminating overspray bypass while providing quick and easy filter change outs. • Tubeaxial exhaust fan, designed specifically for use in paint spray exhaust chambers, powers the airflow through the exhaust stack. All exhaust fans are of non-sparking construction. • Efficient motor drive and bearings are sealed from the air stream of the exhaust. Motors are provided with each unit. Optional explosion-proof motor upgrade is required for flammable painting environments. • Air solenoid valve i nterlocked to the exhaust fan and air supply for the application equipment • RTT products are designed to meet and/or exceed all applicable OSHA and NFPA regulations. Options • Air replacement units and intake chambers can be added. • Reduced air flows for automatic spray operations . • Control panel and other electrical components can be purchased separately. • Explosion-proof motor upgrade. • Design allows for conversion to enclosure.
Follow us on:
2975 Discovery Blvd, Rockwall, TX 75032 | Toll-Free 888-452-6684 | eFax (972) 408-0881 | Email sales@rttsolutions.com | www.rttsolutions.com
EXHAUST CHAMBER S
Exhaust Chamber
Exterior Dimensions
Model Number
Fan Diameter
Fan HP
SCFM @ 1/2” SP
Width Height Length
IBC-04-07-00-00-S IBC-06-07-00-00-S IBC-08-07-00-00-S
4'-4" 6'-4" 8'-4"
7'-2" 7'-2" 7'-2" 7'-2" 7'-2" 7'-2" 7'-2" 7'-2" 7'-2" 8'-2" 8'-2" 8'-2" 8'-2" 8'-2" 8'-2" 8'-2" 8'-2" 8'-2"
2'-2" 2'-8" 2'-8" 3'-2" 3'-2" 3'-6" 3'-6" 4'-6" 4'-6" 2'-2" 2'-8" 2'-8" 3'-2" 3'-2" 3'-6" 4'-6" 4'-6" 4'-6" 2'-2" 2'-8" 3'-2" 3'-2" 3'-2" 4'-6" 4'-6" 4'-6" 4'-6" 2'-8" 2'-8" 3'-2" 3'-2" 4'-2" 4'-6" 4'-6" 4'-6" 4'-6"
18" 24" 24" 30" 30" 30" 30" 36" 36" 18" 24" 24" 30" 30" 30" 36" 36" 42" 18" 24" 30" 30" 30" 36" 42" 42" 42" 24" 24" 30" 30" 36" 42" 42" 42" 42"
.75HP 3,500
1HP 2HP 2HP 3HP 3HP 5HP 5HP 5HP 1HP
5,250 7,000 8,750
IBC-10-07-00-00-S 10'-4" IBC-12-07-00-00-S 12'-4" IBC-14-07-00-00-S 14'-4" IBC-16-07-00-00-S 16'-4" IBC-18-07-00-00-S 18'-4" IBC-20-07-00-00-S 20'-4"
10,500 12,250 14,000 15,750 17,500
IBC-04-08-00-00-S IBC-06-08-00-00-S IBC-08-08-00-00-S
4'-4" 6'-4" 8'-4"
4,000
1.5HP 6,000
3HP 3HP 3HP 5HP 5HP 5HP 5HP
8,000
IBC-10-08-00-00-S 10'-4" IBC-12-08-00-00-S 12'-4" IBC-14-08-00-00-S 14'-4" IBC-16-08-00-00-S 16'-4" IBC-18-08-00-00-S 18'-4" IBC-20-08-00-00-S 20'-4"
10,000 12,000 14,000 16,000 18,000 20,000
IBC-04-10-00-00-S IBC-06-10-00-00-S IBC-08-10-00-00-S
4'-4" 6'-4" 8'-4"
10'-2" 10'-2" 10'-2"
1.5HP 5,000
2HP 3HP 3HP 5HP 5HP 5HP 5HP
7,500
10,000 12,500 15,000 17,500 20,000 22,500
IBC-10-10-00-00-S 10'-4" 10'-2" IBC-12-10-00-00-S 12'-4" 10'-2" IBC-14-10-00-00-S 14'-4" 10'-2" IBC-16-10-00-00-S 16'-4" 10'-2" IBC-18-10-00-00-S 18'-4" 10'-2" IBC-20-10-00-00-S 20'-4" 10'-2"
7.5HP 25,000 1.5HP 6,000
IBC-04-12-00-00-S IBC-06-12-00-00-S IBC-08-12-00-00-S
4'-4" 6'-4" 8'-4"
12'-2" 12'-2" 12'-2"
3HP 3HP 5HP 5HP 5HP
9,000
12,000 15,000 18,000 21,000
IBC-10-12-00-00-S 10'-4" 12'-2" IBC-12-12-00-00-S 12'-4" 12'-2" IBC-14-12-00-00-S 14'-4" 12'-2" IBC-16-12-00-00-S 16'-4" 12'-2" IBC-18-12-00-00-S 18'-4" 12'-2" IBC-20-12-00-00-S 20'-4" 12'-2"
7.5HP 24,000 7.5HP 27,000 10HP 30,000
Exhaust Bench
Exterior Dimensions
Model Number EB-12-S EB-15-S
CFM @ 1/2" SP
Fan Diameter
Fan HP
Filters Exhaust Manometer
Width Height Length
12'-0" 15'-0"
3'-2" 3'-2"
2'-4" 2'-4"
5,000 5,000
18" 18"
1.5HP 1.5HP
7 8
Yes Yes
Follow us on:
2975 Discovery Blvd, Rockwall, TX 75032 | Toll-Free 888-452-6684 | eFax (972) 408-0881 | Email sales@rttsolutions.com | www.rttsolutions.com
Page 1 Page 2Made with FlippingBook - professional solution for displaying marketing and sales documents online