Staging Accessories
Ultralight Riser Anti- Slip Plugs
Ultralight Riser Leveller Pack
Ultralight Riser Clamp Our robust Riser Clamps are designed to secure stage steps to Ultralight staging or create tiered staging. Made from strong plastic, the clamps have ingenious teeth that fit around the upright tube of the stage riser.
Stop your stage from slipping on shiny floors. These simple anti-slip bungs can be easily pushed into the hole found on the base of your stage riser. The rubber material helps add extra grip to the base of the risers.
If you are using your Ultralight stage on an uneven floor or ground, riser levellers can be added to the bottom block of the stage riser to enable you to reach the desired level. Made from tough non slip rubber.
Number of bungs required per riser: • 2m x 0.52m Stage Riser = 10 bungs • 2m x 1m Stage Riser = 15 bungs • 1m x 1m Stage Riser = 9 bungs • 1m x 0.52m Stage Riser = 6 bungs
Simply slip the correct number of riser levellers under the base of your riser and they will hold securely and help to protect your floor.
The Riser Clamps are designed to be sleek and easy to use, with a simple twist of the screw fixing to loosen or tighten the clamp.
Supplied in a pack of 20.
Supplied in a pack of 50.
UL/A050 0.10kg
UL/A051 0.10kg
The clamps can be positioned anywhere on the risers, enabling you to strengthen any areas where it is needed to create a very strong performance area.
Ultralight Valance Clips
Ultralight 5mm Allen Key
Riser Clamps are sold individually.
Replacement clips for your staging valance. Occasionally, with frequent use, the clips used to secure your valance to the edge of the Ultralight stage deck may work loose and get lost.
A vital tool to help you assemble your stage. We do include a FREE 5mm Allen key with all orders for Ultralight staging no matter how large or small.
UL/A052 0.10kg
Rather than replacing the whole skirt, we offer replacement clips that simply pop into the hole left by the missing clip. We recommend adding a few stitches to the fabric to tighten the hole. Supplied in a pack of 10.
However you may need an extra key, particularly if you have a large stage to assemble with multiple people building it, or if your tool goes missing. Additional and replacement Allen keys can be purchased individually.
UL/A053 0.10kg
M0965009 0.10kg
103
01303 265751 www.gopak.co.uk
Made with FlippingBook. PDF to flipbook with ease