5-38
Product Introduction
Maximum System Design Flexibility The ADAM-5000's modular design allows users to tailor solutions based on their own requirements. Built-in programmable I/O ranges and alarm outputs enhance flexibility in system design. A variety of communication media such as twisted-pair wiring, radio modems and fiber optics are supported. System Maintenance and Troubleshooting The ADAM-5000 series uses hardware self-test and software diagnosis to monitor system problems. Also included is a watchdog timer that monitors the microprocessor. If the system crashes, the watchdog automatically resets the system. Node ID setting is easily accomplished by setting a DIP switch on the front of the system. Easy Installation and Networking The ADAM-5000 series can be easily mounted on a DIN-rail or panel. Signal connections, network modifications and maintenance are simple and quick. Building a multi-drop network only requires a single twisted pair of wires.
Proven for Industrial Environments The ADAM-5000 series can operate in industrial environments at temperatures between -10 and 70°C, and can use unregulated power sources between 10 and 30 V DC . These units are protected against accidental power supply reversals. A 3-way isolation design (I/O, power & communication) prevents ground loops and reduces the effect of electrical noise in the system. Extensive Software Support The ADAM-5000 series is supported by most standard process controls and HMI software. .NET Class LIB is provided for use with Windows applications. OPC drivers provide links to a wide range of HMI/SCADA software packages such as InTouch, FIX and ICONICS. Advantech data acquisition software and Advantech Studio SCADA/ HMI software are both tightly integrated with the ADAM- 5000 systems.
DIN-rail Mounting Installed on industrial standard DIN-rails
Panel/Wall Mounting
Distributed I/O Systems Ethernet-based Data Acquisition and Control System
Flat surface system mounting
With the ADAM-5000/TCP as your Ethernet I/O data processing center, you can monitor and control field signals at speeds of 10/100 Mbps. The best field-proven communication performance that can be reached in industrial network environments. Additionally, the popular Modbus/TCP protocol is also supported. RS-485 based Data Acquisition and Control System The ADAM-5000/485 system is a data acquisition and control system that can acquire, monitor and control data through multi-channel I/O modules. It communicates with a network master over a twisted-pair, multi-drop RS-485 network. Both ADAM ASCII and Modbus/RTU protocols are supported. Simple and Cost Effective Network
Node ID Setting
8-pin dip switch configuration
Industrial PC
Touch Panel PC
Embedded Box PC
Connection Pre-wired plug-in terminals with I/O modules
RS-485 Remote I/O Modules
Ethernet Remote I/O Modules
Remote I/O Modules
Made with FlippingBook - professional solution for displaying marketing and sales documents online