1.3 Installing L3 Series Software L3 Series material testing software is installed by Starrett and checked to make sure that when your system arrives, all that is needed is to connect system components and power the system. L3 Series software uses a Windows ® operating system and is compatible with Windows 7 and Windows 8. When the L3 Series software is installed, two (2) basic operations occur: • A shortcut is setup on the L3 workstation that is used to launch the L3 Series software; • The Metlogix directory is created, that resides on the L3 Workstation’s Libraries/Documents location. NOTE L3 Series software should reside on an L3 Series Workstation that is dedicated to advanced force testing and used exclusively with a Starrett MMS or MMD test frames. CAUTION Anti-virus software may effect the operation of your L3 System- it can cause “USB heartbeat errors” between the workstation and the testing frame. During testing operations, Starrett recommends that you deactivate anti-virus software if present on the work station.
1.3.1 L3 Series Software Registration L3 Series software may be used with one (1) Starrett test frame. The software is security protected and is registered to the hardware the software is being used with. Starrett does not supply additional licenses for our L3 Series software. Users must purchase an additional copy of the software if it is required to be used on another Starrett testing machine. NOTE Please make sure to register your software on-line at starrett. com. This ensures we have a way to send you software updates. NOTE Starrett does NOT sell additional licenses, nor does it allow that a single application be permitted to operate on multiple computers or workstations. Lx Series software from Starrett may reside on one workstation only.
starrett.com
15
Made with FlippingBook - professional solution for displaying marketing and sales documents online