4.2.6 Test/Step Velocity Indicator During a test run, the crosshead’s current velocity is displayed with the units of measure for speed.
During each test step, the crosshead velocity is displayed in both the main Controller view and in the Step Message box (bottom).
Test Setup for My Tensile Test Step 2 is being performed
A Step message is displayed for each test step is the test setup. Included is the Step Number and the key step parameters, e.g. Limit, Direction, Speed.
Step Direction
Step Number
Active crosshead speed Velocity displayed during a test step
starrett.com
11
Made with FlippingBook - professional solution for displaying marketing and sales documents online