4.4 Test Operation Controls Starrett recommends using the Start/Stop push button for operating a test. Alternatively, you may use the touch targets on the Controller view.
4.4.1 Start Test Control When the test setup is launched, you may proceed to start the test run. Prior to starting a test run, make sure your sample is secured in the test fixture. If you have not configured automatic Home and automatic zeroing in your test setup, you should perform the following sequence prior to selecting Start: 1. Select L target to zero Load; 2. Select D target to zero Displacement; 3. Select SELECT HOME target to establish your home position. Once these pre-test run functions are completed, you may now press the Start/Stop push button or the START TEST target.
NOTE Start a test using the Start/Stop push button or by selecting the START TEST target on the Controller view.
Start/Stop Test Push Button Located next to jog switch
Start Target Press to begin a test run
starrett.com
17
Made with FlippingBook - professional solution for displaying marketing and sales documents online